Join 60,000+ competitive exam aspirants
Wind turbines are controlled by
Built-in computer
Operator
Electricity board
None of above
Built-in computer
Wind turbines utilize an integrated Programmable Logic Controller (PLC) or industrial computer to autonomously manage operation, safety, and power output. This control system continuously monitors sensor inputs and adjusts mechanical parameters to optimize efficiency and protect the turbine during varying wind conditions.
Wind turbines utilize an integrated Programmable Logic Controller (PLC) or industrial computer to autonomously manage operation, safety, and power output. This control system continuously monitors sensor inputs and adjusts mechanical parameters to optimize efficiency and protect the turbine during varying wind conditions.
P=21тАЛ╧БAv3CpтАЛ тАФ where P is power, ╧Б is air density, A is swept area, v is wind velocity, and CpтАЛ is power coefficient controlled by the computer via blade pitch.
TaeroтАЛ=╧ЙPтАЛ тАФ where TaeroтАЛ is aerodynamic torque managed by the control system relative to rotational speed ╧Й.
The onboard computer processes real-time data from sensors measuring wind speed, direction, rotor RPM, and generator temperature. It controls hydraulic or electric pitch actuators to adjust blade angle for optimal lift, and yaw motors to orient the nacelle into the wind. If environmental limits are exceeded, the computer initiates an emergency shutdown via mechanical brakes or pitch feathering to prevent damage.
Control systems use closed-loop feedback to manage Pitch and Yaw.
The computer system is responsible for 'Cut-in' and 'Cut-out' wind speed logic.
Emergency braking sequences are pre-programmed for safety (e.g., during high gusts).
Modern turbines are connected to SCADA (Supervisory Control and Data Acquisition) systems, but primary local control resides in the turbine's computer.
Real-time optimization of power extraction
Continuous safety monitoring without human intervention
High complexity of electronic control modules
Vulnerability to lightning strikes and electromagnetic interference
Onshore and offshore wind farms
Standalone micro-grid wind power systems
Option B (Operator) is incorrect as direct manual control is impractical and dangerous.
Option C (Electricity Board) is incorrect as they monitor grid stability but do not control the individual mechanical operation of a turbine.
The computer is often housed in the nacelle or the base of the tower.
A is correct тАФ Wind turbines are controlled by a built-in computer, which manages pitch, yaw, and safety systems automatically.
In power systems exams, distinguish between 'supervisory control' (SCADA/Grid operators) and 'local control' (embedded PLC). Wind turbines rely on the local PLC for moment-to-moment mechanical stability.