Join 60,000+ competitive exam aspirants
Wind turbines using aerodynamic lift produces more energy for a given area then wind turbines using aerodynamic drag as the
Lifting force pushes the blades in the direction of wind
Lifting force is roughly perpendicular to local flow field
Lifting force produces more torque
Drag services capture more energy because of greater friction on blade surface
Lifting force produces more torque
Wind turbines utilizing aerodynamic lift operate on the Bernoulli principle, where the airflow over the blade shape (airfoil) creates a pressure differential that generates high-magnitude lift forces. This lift force, acting tangentially to the rotation, produces significantly higher torque compared to drag-based designs, which rely solely on wind resistance pushing against a surface.
Wind turbines utilizing aerodynamic lift operate on the Bernoulli principle, where the airflow over the blade shape (airfoil) creates a pressure differential that generates high-magnitude lift forces. This lift force, acting tangentially to the rotation, produces significantly higher torque compared to drag-based designs, which rely solely on wind resistance pushing against a surface.
L=21тАЛ╧БAv2CLтАЛ тАФ Lift force magnitude
╧Д=LтЛЕrтЛЕsin(╬▒) тАФ Torque produced by lift force
In lift-based turbines, the relative wind velocity vector (a combination of wind speed and blade rotation speed) creates an angle of attack that maximizes the lift force perpendicular to the relative flow. This force is decomposed into a component along the blade's rotation path, generating torque. Because lift coefficients are much higher than drag coefficients for specialized airfoils, the resulting mechanical power output is far superior.
Lift-based turbines have higher Tip Speed Ratios (TSR).
Drag-based turbines (like Savonius) have high starting torque but low rotational efficiency.
Airfoil geometry is critical to maintaining the lift force throughout the rotation cycle.
Lift force allows blades to move faster than the incident wind speed.
Higher power coefficient (CPтАЛ)
Higher rotational speed suitable for electricity generation
Requires active pitch control for high wind speeds
Cannot self-start as effectively as pure drag devices
Utility-scale horizontal axis wind turbines (HAWT)
High-efficiency commercial wind farms
| Feature | Lift-based | Drag-based |
|---|---|---|
Driving Principle | Pressure differential (Bernoulli) | Wind resistance/friction |
Efficiency (CPтАЛ) | High (up to 0.59 Betz limit) | Low (< 0.20) |
The maximum efficiency for any wind turbine is limited by the Betz Limit, CPтАЛтЙИ0.593. Lift-based designs approach this limit much closer than drag-based designs.
Option B is incorrect because while the lift force is perpendicular to the local flow, the component of this force along the path of rotation is what generates the useful torque.
C is correct тАФ Lifting force generates a significant torque component tangential to the turbine's rotation, resulting in much higher energy extraction efficiency than drag forces.
Always remember that in electrical generation, high-speed rotation is preferred for alternators; hence, high-torque, lift-based turbines are standard for utility grids.