Join 60,000+ competitive exam aspirants
Zero sequence component in 3 phase voltage of delta is
Line voltage
Zero
3тАЛ line voltage
Line voltage / 3
Zero
In a balanced or unbalanced three-phase system, the zero-sequence component of the line-to-line voltages in a delta connection is always zero. This is because the sum of the line voltages in a delta-connected system must be zero (Kirchhoff's Voltage Law around the closed loop), and the zero-sequence component is defined as one-third of the sum of the phasors.
In a balanced or unbalanced three-phase system, the zero-sequence component of the line-to-line voltages in a delta connection is always zero. This is because the sum of the line voltages in a delta-connected system must be zero (Kirchhoff's Voltage Law around the closed loop), and the zero-sequence component is defined as one-third of the sum of the phasors.
V0тАЛ=31тАЛ(VaтАЛ+VbтАЛ+VcтАЛ) тАФ Definition of zero sequence component
VabтАЛ+VbcтАЛ+VcaтАЛ=0 тАФ KVL in a delta loop
The zero-sequence component of a set of phasors VaтАЛ,VbтАЛ,VcтАЛ is defined as V0тАЛ=31тАЛ(VaтАЛ+VbтАЛ+VcтАЛ). In a delta-connected winding, the line-to-line voltages are defined as VabтАЛ, VbcтАЛ, and VcaтАЛ. By KVL, VabтАЛ+VbcтАЛ+VcaтАЛ=0. Since the vector sum is zero, their average (the zero-sequence component) must also be zero.
Zero sequence components represent the common-mode component of a three-phase system.
Delta-connected windings provide a closed path for zero-sequence currents but suppress zero-sequence voltages from appearing across line terminals.
The sum of line voltages in any closed delta loop is identically zero.
Prevents zero-sequence voltage stress in delta configurations
Circulates zero-sequence currents to minimize interference in power systems
Transformer winding configurations
Fault analysis in power systems
In a Y-connected system with a neutral point, zero-sequence voltages can exist if the neutral is floating or grounded via impedance.
The zero-sequence voltage is inherently absent in line-to-line measurements of a delta connection regardless of load balance.
B is correct тАФ The zero sequence component of the line voltages in a delta connection is zero because the sum of the line-to-line voltages around the delta loop is zero.
Remember that while zero-sequence currents can circulate within a delta winding, zero-sequence voltages cannot be measured between line terminals.