Join 60,000+ competitive exam aspirants
A 1 ╧Ж, 50 Hz transformer is having a voltage ratio of 300/3000 volts. If Emf per turn is 10 volts find primary and secondary number of turns.
300, 3000
100, 1000
30, 300
300, 30
30, 300
The number of turns in a transformer winding is determined by dividing the terminal voltage of that winding by the induced EMF per turn. Given the EMF per turn is constant (10┬аV/turn), the primary turns (NpтАЛ) are calculated as VpтАЛ/10 and secondary turns (NsтАЛ) as VsтАЛ/10.
The number of turns in a transformer winding is determined by dividing the terminal voltage of that winding by the induced EMF per turn. Given the EMF per turn is constant (10┬аV/turn), the primary turns (NpтАЛ) are calculated as VpтАЛ/10 and secondary turns (NsтАЛ) as VsтАЛ/10.
EturnтАЛ=NpтАЛVpтАЛтАЛ=NsтАЛVsтАЛтАЛ тАФ EMF per turn formula
N=EturnтАЛVтАЛ тАФ Determining number of turns
According to Faraday's Law of Induction, the induced EMF in a winding is proportional to the number of turns. Since the flux is common to both windings in an ideal transformer, the ratio of voltages is equal to the ratio of turns (VpтАЛ/VsтАЛ=NpтАЛ/NsтАЛ), which corresponds directly to the EMF per turn constant (V/N=EturnтАЛ=10).
The EMF per turn is constant for both primary and secondary windings in an ideal transformer.
For this problem, NpтАЛ=10300тАЛ=30 and NsтАЛ=103000тАЛ=300.
Transformer voltage ratio is directly proportional to the turns ratio: VsтАЛVpтАЛтАЛ=NsтАЛNpтАЛтАЛ.
Direct calculation without needing core cross-section area or flux density.
Simplifies transformer design estimation.
Assumes ideal condition (no leakage flux).
Neglects the difference between induced EMF and terminal voltage (neglects I├ЧR drops).
Preliminary design of transformer winding turns.
Quick verification of voltage ratings in power engineering.
Option A (300, 3000) corresponds to the voltage values themselves, not the turns.
Option B (100, 1000) would imply an EMF per turn of 3V, which is incorrect.
Option D (300, 30) is the inverse of the required turns ratio, leading to a step-down transformer instead of step-up.
C is correct тАФ Dividing the primary voltage (300V) and secondary voltage (3000V) by the EMF per turn (10V) yields 30 turns and 300 turns respectively.
Always remember that in any transformer, the voltage ratio is identical to the turns ratio: V2тАЛV1тАЛтАЛ=N2тАЛN1тАЛтАЛ.