Join 60,000+ competitive exam aspirants
A 100 kVA, 2 winding transformer has an iron loss of 1 kW and a copper loss of 1.5 kW at normal output current. Calculate efficiency at 0.8 lagging power factor.
96.96
75.75
83.83
93.93
96.96
The efficiency of a transformer at any given load is defined as the ratio of output power to input power. For a load with power factor cos╧Х, the efficiency is calculated using the formula ╬╖=kVA├Чpf+PiтАЛ+x2PcuтАЛkVA├ЧpfтАЛ, where x is the fraction of full load.
The efficiency of a transformer at any given load is defined as the ratio of output power to input power. For a load with power factor cos╧Х, the efficiency is calculated using the formula ╬╖=kVA├Чpf+PiтАЛ+x2PcuтАЛkVA├ЧpfтАЛ, where x is the fraction of full load.
╬╖=S├Чcos╧Х+PiтАЛ+x2PcuтАЛS├Чcos╧ХтАЛ тАФ General efficiency formula for transformers
PlossтАЛ=PiтАЛ+x2PcuтАЛ тАФ Total power loss as a function of loading x
The transformer efficiency is limited by constant iron losses (PiтАЛ) and variable copper losses (PcuтАЛ). At full load (x=1), copper loss is 1.5 kW. The input power is the sum of active output power (100├Ч0.8=80 kW) and total losses (1+1.5=2.5 kW). Efficiency is thus 82.580тАЛ├Ч100тЙИ96.96%.
Iron loss (PiтАЛ) is independent of the load and remains constant.
Copper loss (PcuтАЛ) varies with the square of the load current.
Maximum efficiency occurs when iron loss equals copper loss (PiтАЛ=x2PcuтАЛ).
High efficiency across a broad operating range
Precise control of secondary voltage via turns ratio
Efficiency drops significantly at light loads due to constant iron loss
Sensitive to power factor variations
Power transmission and distribution networks
Impedance matching in electronic circuits
The output power PoutтАЛ=100┬аkVA├Ч0.8=80┬аkW.
The input power PinтАЛ=80┬аkW+1┬аkW+1.5┬аkW=82.5┬аkW.
Option B (75.75) represents an incorrect arithmetic ratio calculation.
Option C (83.83) and D (93.93) are distractor values resulting from improper loss summation.
A is correct тАФ The efficiency is calculated as 82.580тАЛтЙИ0.9696, or 96.96%.
Always remember that transformer efficiency peaks when constant losses equal variable losses, often used in finding the optimum load for maximum efficiency.