Join 60,000+ competitive exam aspirants
A 4 pole dc generator is running at 1500 rpm the frequency of the current in the armature winding is __________ Hz.
50
100
150
200
50
In a DC generator, the armature current is inherently alternating (AC) due to the rotating coil within the magnetic field. The frequency (f) of this induced AC is determined by the machine's speed and the number of poles.
In a DC generator, the armature current is inherently alternating (AC) due to the rotating coil within the magnetic field. The frequency (f) of this induced AC is determined by the machine's speed and the number of poles.
f=120P├ЧNтАЛ тАФ where f is frequency in Hz, P is number of poles, and N is speed in rpm
The frequency of the induced EMF in the armature winding of a DC machine is given by the relation between speed in rpm and the number of poles. Since the flux is constant and poles are fixed, each pair of poles completes one cycle of alternation per revolution.
The induced EMF in the armature conductors of a DC generator is always alternating.
The frequency of the AC induced in the armature is proportional to the speed and the number of pole pairs.
The commutator acts as a mechanical rectifier, converting the induced AC into DC at the output terminals.
Simple relationship between mechanical speed and electrical frequency.
Predictable performance for design optimization.
High frequencies in high-speed machines can increase iron losses.
Requires proper commutation to handle the internal AC conversion.
DC generator design and analysis.
Calculating eddy current and hysteresis losses in armature cores.
The formula f=120PNтАЛ is derived from f=2PтАЛ├Ч60NтАЛ where N/60 is the speed in revolutions per second.
Option B (100 Hz) would result from a machine with 8 poles or double the speed.
A is correct тАФ Using the formula f=120PNтАЛ, substituting P=4 and N=1500 yields f=1204├Ч1500тАЛ=50 Hz.
Remember that while the output of a DC generator is DC, the internal armature winding always carries AC; this is a frequent trap in conceptual interviews.