Join 60,000+ competitive exam aspirants
A 4 pole lap wound dc generator has 4 brushes if one of the brush is damaged, what will be the change in V, I and P ratings
V, I and P
V/2, I/2, and P/4
V/2, I, and P/2
V, I/2, and P/2
V, I/2, and P/2
In a lap-wound DC generator, the number of parallel paths A is equal to the number of poles P. If one brush is damaged, the current carrying capacity and power rating are halved because the total current capacity is divided among the remaining parallel paths, while the terminal voltage remains unchanged.
In a lap-wound DC generator, the number of parallel paths A is equal to the number of poles P. If one brush is damaged, the current carrying capacity and power rating are halved because the total current capacity is divided among the remaining parallel paths, while the terminal voltage remains unchanged.
A=P тАФ Number of parallel paths in lap winding
P=V├ЧI тАФ Power relation for DC generator
In a lap winding, total armature current IaтАЛ=IzтАЛ├ЧA, where IzтАЛ is the current per conductor and A is the number of parallel paths (A=P=4). Removing one brush effectively isolates one of the parallel paths. While the machine's terminal voltage V is determined by the flux per pole and speed, and remains constant, the current rating is reduced to I/2 because only two paths (out of four) are effectively conducting, leading to a total power rating reduction to P/2.
In lap-wound machines, A=P=4.
Damaging one brush reduces the effective number of parallel paths in the armature circuit.
Terminal voltage V remains independent of the number of active brushes.
The total current capacity of the machine is proportional to the number of active parallel paths.
High current capability for low voltage applications
Simple construction
Requires more brushes than wave winding
Sensitive to asymmetry in armature windings
Electroplating
Battery charging
High-current DC power supplies
A lap winding is also known as a parallel winding.
Option B is incorrect because voltage does not drop in this configuration, only current capacity is affected.
D is correct тАФ In a 4-pole lap-wound machine, losing a brush reduces the number of effective parallel paths by half, halving the current and power ratings while maintaining the terminal voltage.
Always remember that for Wave winding (A=2), damage to a brush causes total machine failure, whereas in Lap winding (A=P), it results in a proportional reduction in capacity.