Join 60,000+ competitive exam aspirants
A bus coupler circuit breaker is utilized in a substation for
Joining the transmission line with station bus-bar
Joining main and transfer bus in a substation
Joining the generator with transfer
Joining the neutral of the generator with earth
Joining main and transfer bus in a substation
A bus coupler is a circuit breaker used to connect or disconnect the main bus and the transfer bus in a substation. It serves as a bridge, allowing for the transfer of loads between buses without interrupting power supply during maintenance or fault conditions.
A bus coupler is a circuit breaker used to connect or disconnect the main bus and the transfer bus in a substation. It serves as a bridge, allowing for the transfer of loads between buses without interrupting power supply during maintenance or fault conditions.
PtotalтАЛ=тИСPiтАЛ тАФ Total load management across coupled bus sections
Irated,couplerтАЛтЙеIloadтАЛ тАФ Current capacity constraint for the coupler breaker
The bus coupler circuit breaker operates by creating a physical path between two bus-bar systems. By closing the breaker, the main bus and transfer bus are paralleled, enabling the shifting of feeder circuits from the main bus to the transfer bus. Once the shifting is completed, the coupler can be opened, isolating the main bus for repair or maintenance while the loads remain energized through the transfer bus.
Used extensively in 'Double Bus' and 'Main and Transfer Bus' configurations.
Essential for redundancy and continuous operation during circuit breaker maintenance.
Allows bus-bar sectioning in case of local faults.
Reduces downtime during routine inspection of isolators and breakers.
Provides flexibility in switching operations
Ensures system reliability and maintenance safety
Adds complexity to protection and control wiring
Increases initial installation cost of the substation
Substations with multiple bus-bar arrangements
Power grid synchronization stations
The bus coupler circuit breaker is critical in high-voltage substations to ensure that load transfer is achieved without power interruption.
Option A is incorrect as feeders connect transmission lines; Option C is irrelevant to bus coupler function; Option D describes neutral grounding (typically via a NGR/NGT).
B is correct тАФ A bus coupler is specifically used for joining the main bus and the transfer bus in a substation.
Always remember: Isolators operate on no-load, while circuit breakers (including bus couplers) are designed for load current and fault current interruption.