Join 60,000+ competitive exam aspirants
Gas Insulated Substation is employed where
high altitude substations
there is less space available
terrain region
All the above
there is less space available
Gas Insulated Substation (GIS) utilizes sulfur hexafluoride (SF6тАЛ) gas for insulation, which possesses a significantly higher dielectric strength compared to air. This allows for a much smaller physical footprint, making it the ideal choice for locations where space is limited, such as urban centers or industrial sites.
Gas Insulated Substation (GIS) utilizes sulfur hexafluoride (SF6тАЛ) gas for insulation, which possesses a significantly higher dielectric strength compared to air. This allows for a much smaller physical footprint, making it the ideal choice for locations where space is limited, such as urban centers or industrial sites.
EdтАЛтЙИ3├ЧEairтАЛ тАФ Dielectric strength comparison where E is the electric field breakdown strength
VinsтАЛ=2╧А╧╡1тАЛln(r1тАЛr2тАЛтАЛ) тАФ Potential distribution in coaxial GIS bus arrangement
In a GIS, all live parts are enclosed in metallic modules filled with SF6тАЛ gas at elevated pressure. Because the dielectric strength of SF6тАЛ is approximately 2.5 to 3 times that of air at atmospheric pressure, the required phase-to-phase and phase-to-ground clearances are drastically reduced, often occupying only 10% to 25% of the space required by conventional Air Insulated Substations (AIS).
Uses SF6тАЛ gas as the primary insulating medium.
Enclosed design protects against atmospheric contaminants like salt, moisture, and pollution.
Low maintenance due to hermetically sealed components.
High reliability and safety due to earthed metal enclosure.
Compact size suitable for urban areas
High immunity to environmental conditions
Low maintenance requirements
High operational safety
High initial capital investment
Stringent gas handling and monitoring requirements
Difficult to detect internal faults during operation
Urban substations with limited land
Offshore platforms
Underground substations
Power plants with space constraints
| Feature | GIS | AIS |
|---|---|---|
Space Requirement | Very Low | High |
The SF6тАЛ gas used is electronegative, which helps in quenching arcs effectively.
Options A and C refer to environments where GIS might be installed due to its environmental resistance, but the fundamental purpose that distinguishes GIS as an engineering choice in design specifications is the space optimization.
B is correct тАФ Gas Insulated Substations are specifically designed with high dielectric strength media to minimize the required clearance between phases, making them ideal for space-constrained locations.
Always remember that while GIS is excellent for high altitude or polluted regions due to its sealed design, the primary driver for its selection in competitive exams is almost always 'space limitation'.