Join 60,000+ competitive exam aspirants
A condenser in a steam power plant condenses steam coming out of
Turbine
Boiler
Economizer
Super heater
Turbine
In a steam power plant, the condenser is located at the exhaust of the steam turbine. Its primary purpose is to convert the low-pressure, low-temperature exhaust steam back into liquid water (condensate), which is then pumped back to the boiler.
In a steam power plant, the condenser is located at the exhaust of the steam turbine. Its primary purpose is to convert the low-pressure, low-temperature exhaust steam back into liquid water (condensate), which is then pumped back to the boiler.
WnetтАЛ=WturbineтАЛтИТWpumpтАЛ тАФ net work output of the cycle
╬╖thermalтАЛ=QinтАЛWnetтАЛтАЛ тАФ thermal efficiency of the steam power plant
As exhaust steam enters the condenser, it comes in contact with tubes carrying cooling water. The steam loses its latent heat of vaporization to the cooling medium through these tubes, causing it to condense into liquid. This process creates a vacuum at the turbine exhaust, which significantly increases the enthalpy drop across the turbine, thereby improving the overall thermal efficiency of the Rankine cycle.
Condenser pressure is maintained significantly below atmospheric pressure (vacuum).
The vacuum pressure allows for maximum work extraction from the turbine by expanding the steam to lower pressures.
Condensed water (condensate) is recirculated, reducing the need for raw feedwater treatment.
Increases the efficiency of the power plant by maintaining a vacuum.
Allows for recovery of high-quality distilled water for the boiler.
Requires a large amount of cooling water.
Condenser tubes are prone to scaling and corrosion.
Thermal steam power plants
Nuclear power plants
Combined cycle power plants
The condenser serves as the sink in the Rankine cycle.
Option B (Boiler) produces steam, Option C (Economizer) preheats feedwater, and Option D (Super heater) raises steam temperature; none of these condense steam.
A is correct тАФ The condenser is situated at the turbine exit to extract latent heat from the exhausted steam and convert it into liquid condensate.
Always remember that the condenser's job is to close the loop in the Rankine cycle, turning vapor back into liquid to allow for a continuous pumping process.