Join 60,000+ competitive exam aspirants
Condensers in thermal power plants are condensing
Steam to water
Water to ice
Hydrogen gas to liquid gas
Carbon dioxide to dry ice
Steam to water
In a thermal power plant, the condenser is a critical heat exchanger that converts low-pressure exhaust steam from the turbine into liquid water (condensate). This phase change occurs by transferring heat to a cooling medium, typically circulating cooling water, thereby maintaining a high vacuum at the turbine exhaust to maximize thermodynamic efficiency.
In a thermal power plant, the condenser is a critical heat exchanger that converts low-pressure exhaust steam from the turbine into liquid water (condensate). This phase change occurs by transferring heat to a cooling medium, typically circulating cooling water, thereby maintaining a high vacuum at the turbine exhaust to maximize thermodynamic efficiency.
Q=m╦ЩтЛЕhfgтАЛ тАФ rate of heat transfer required for phase change
╬╖thermalтАЛ=QinтАЛWnetтАЛтАЛ тАФ thermal efficiency improvement via vacuum maintenance
The exhaust steam enters the condenser shell, where it flows over a tube bundle containing cold circulating water. As the latent heat of the steam is transferred to the cooling water, the steam condenses into water at the bottom of the shell. This process significantly reduces the volume of the steam, creating a vacuum that increases the enthalpy drop across the turbine according to the Rankine cycle.
Condensers operate under high vacuum conditions (below atmospheric pressure).
The latent heat of condensation is carried away by the circulating water system (e.g., cooling towers or river water).
Condensate is recycled back to the boiler via the feed pump, forming a closed loop.
A condenser acts as a heat sink in the Rankine cycle.
Recovers high-purity water for boiler feed.
Increases the work output of the turbine by lowering back pressure.
Requires large quantities of cooling water.
Prone to corrosion and tube fouling over time.
Coal-fired power plants
Nuclear power stations
Combined cycle gas turbines
The vacuum pressure is usually maintained around 0.05 to 0.1 bar.
Option B is incorrect because ice formation does not occur in power plant condensers.
Option C and D relate to different industrial processes not found in standard Rankine cycle plant condensers.
A is correct тАФ Condensers in thermal power plants facilitate the phase change of turbine exhaust steam back into liquid water to maintain a vacuum cycle.
Always remember that the lower the condenser pressure, the higher the turbine expansion ratio and consequently the higher the plant thermal efficiency.