Join 60,000+ competitive exam aspirants
A gas turbine power plant is best suited for
Base loads
Peak loads
Emergency loads
None of above
Peak loads
Gas turbine power plants are characterized by rapid startup times and the ability to reach full load capacity within minutes. Because of this quick response capability and relatively lower capital cost, they are primarily deployed to meet peak electricity demands rather than continuous base loads.
Gas turbine power plants are characterized by rapid startup times and the ability to reach full load capacity within minutes. Because of this quick response capability and relatively lower capital cost, they are primarily deployed to meet peak electricity demands rather than continuous base loads.
╬╖thтАЛ=1тИТ(rpтАЛ)╬│╬│тИТ1тАЛ1тАЛ тАФ Thermal efficiency of the ideal Brayton cycle
WnetтАЛ=WturbineтАЛтИТWcompressorтАЛ тАФ Net work output
The plant operates on the Brayton cycle, involving compression of air, constant pressure combustion with fuel, and expansion through a turbine to generate mechanical work. Since these units lack the high thermal inertia of large steam turbines and can start cold to full load in under 20 minutes, they are ideal for balancing short-term load spikes.
Gas turbines have a low thermal efficiency compared to combined cycle or steam plants.
Quick start-up and shut-down capability minimizes standby energy losses.
Used in 'Peaking' operation modes during high grid demand intervals.
Requires high-quality fuel (natural gas or high-grade distillate) for long turbine life.
Extremely fast start-up time
Low capital investment per unit power capacity
Compact physical footprint
No requirement for massive cooling water supply
Low thermal efficiency
Sensitive to ambient air temperature
High maintenance costs for hot section components
Dependency on expensive, high-quality fuels
Peaking power generation
Emergency/Standby power supply
Aircraft propulsion
Marine vessels
| Feature | Steam/Nuclear | Gas Turbine |
|---|---|---|
Load Handling | Base Load | Peak Load |
Base load plants, like coal or nuclear, have high start-up times (hours to days), making them inefficient for intermittent operation.
Option A is incorrect because steam plants are preferred for base loads due to fuel economy at constant operation.
Option C is partially true but 'Peak loads' is the more comprehensive technical classification in power system planning.
B is correct тАФ Gas turbine plants are designed to handle peak loads due to their rapid start-up capability and high flexibility.
In competitive exams, remember the 'Merit Order Dispatch' principle: plants are ranked by marginal cost, and gas turbines are often at the top of the stack because their fuel is expensive but they can be turned on/off quickly.