Join 60,000+ competitive exam aspirants
A large series motor is never started without some mechanical load on it because otherwise, it will
produce sparking at brushes
open fuse or circuit breaker
draw too much current
develop excessive speed and damage itself
develop excessive speed and damage itself
In a DC series motor, Speed is inversely proportional to Armature Current (N proportional to 1/Ia). No load means Ia is almost zero, leading to N approaching infinity.
In a DC series motor, Speed is inversely proportional to Armature Current (N proportional to 1/Ia). No load means Ia is almost zero, leading to N approaching infinity.
Recall the Speed Equation
The speed (N) of a DC motor is proportional to the Back EMF (Eb) divided by Flux (Phi). In a series motor, Flux is proportional to the Armature Current (Ia).
Analyze the No-Load condition
At no load, Ia becomes extremely small (approaching zero). Since Phi is proportional to Ia, the flux also approaches zero. As N is proportional to 1/Phi, the speed rises to dangerous levels.
A: Sparking is a side effect but not the primary catastrophic failure; B: No load results in low current, so a fuse would not trip; C: No load actually causes current to drop, not increase.
D is correct because in a series motor, the flux is directly proportional to armature current, and at no-load, the near-zero flux forces the motor to attain dangerously high speeds.
Always remember: DC Series motors are never started without a load, whereas DC Shunt motors can be started at no-load because their flux remains constant.