Join 60,000+ competitive exam aspirants
A wind turbine designed to come into operation at a minimum wind speed is called
Cut in velocity
Cut out velocity
Windward
Upwind
Cut in velocity
The 'Cut-in velocity' is the minimum wind speed required for a wind turbine to start rotating and generate useful electrical power. Below this threshold, the torque generated by the rotor is insufficient to overcome the mechanical friction and inertia of the drive train.
The 'Cut-in velocity' is the minimum wind speed required for a wind turbine to start rotating and generate useful electrical power. Below this threshold, the torque generated by the rotor is insufficient to overcome the mechanical friction and inertia of the drive train.
P=21тАЛ╧БAv3CpтАЛ тАФ Power available in wind, where v is wind velocity.
Wind turbines operate by converting the kinetic energy of wind into mechanical energy. At very low speeds, the aerodynamic lift produced by the turbine blades is lower than the resistive forces (friction, magnetic cogging). Once the wind speed reaches the 'Cut-in' velocity, the system engages, and the turbine begins to accelerate toward its nominal operating speed.
Cut-in velocity is typically between 3 m/s and 5 m/s for modern turbines.
Cut-out velocity is the maximum speed at which the turbine operates before braking for safety.
Below the cut-in speed, the turbine may remain locked or rotate in a 'freewheel' state without generating power.
The power output is proportional to the cube of the wind speed (PтИЭv3).
Protects mechanical components from premature wear at low torque.
Prevents operating in wind regimes where energy conversion efficiency is negligible.
Reduces total annual energy yield in low-wind regions.
Requires complex control systems to manage start-stop cycles.
Onshore wind farms
Offshore power generation
Cut-out velocity: Usually around 25 m/s, where the turbine is shut down to prevent structural damage.
Option B (Cut out velocity) refers to the safety upper limit, not the starting threshold.
Options C and D refer to the relative orientation of the turbine blades towards the wind flow.
A is correct тАФ The cut-in velocity represents the minimum wind speed required to initiate power generation by overcoming system losses.
In competitive exams, always distinguish between 'Cut-in' (start) and 'Cut-out' (stop/safety) velocities, as these define the operational window of a wind energy system.