Join 60,000+ competitive exam aspirants
ACSR is used in place of copper in overhead line because of
High current carrying capacity
Lighter in weight
Economy
Higher tensile strength
Economy
ACSR (Aluminum Conductor Steel Reinforced) is preferred over copper for overhead transmission lines primarily due to economic factors, as aluminum is significantly cheaper and lighter than copper. Despite copper's superior conductivity, ACSR combines the high conductivity of aluminum with the high mechanical strength of a steel core, allowing for longer spans and reduced tower costs.
ACSR (Aluminum Conductor Steel Reinforced) is preferred over copper for overhead transmission lines primarily due to economic factors, as aluminum is significantly cheaper and lighter than copper. Despite copper's superior conductivity, ACSR combines the high conductivity of aluminum with the high mechanical strength of a steel core, allowing for longer spans and reduced tower costs.
RACтАЛ=A╧БLтАЛ тАФ Resistance calculation for the aluminum strands
TtotalтАЛ=TAlтАЛ+TSteelтАЛ тАФ Tensile strength contribution of components
ACSR consists of a central galvanized steel core surrounded by layers of stranded aluminum wires. The steel core provides the necessary tensile strength to withstand mechanical stress and wind loads, while the aluminum strands carry the bulk of the electrical current. This composite structure allows for a higher strength-to-weight ratio than a pure copper conductor of equivalent conductivity, leading to reduced support tower height and foundation costs.
ACSR stands for Aluminum Conductor Steel Reinforced.
The steel core carries mechanical load; aluminum carries electrical current.
Lower density of aluminum compared to copper reduces the sag and mechanical tension on supporting structures.
Copper is too heavy and expensive for long-distance high-voltage transmission compared to ACSR.
Higher strength-to-weight ratio
Lower capital cost compared to copper
Reduced sag allows for longer spans between towers
Corona loss is reduced due to larger effective diameter
Higher resistance per unit area compared to copper
Complex manufacturing process compared to homogeneous conductors
Potential for galvanic corrosion if not properly protected
Long-distance overhead power transmission lines
High-voltage distribution networks
Rural electrification projects where span length is a constraint
| Feature | ACSR | Copper |
|---|---|---|
Cost | Low | High |
Strength/Weight | High | Low |
While high tensile strength (Option D) is a major characteristic of ACSR, 'Economy' is the primary reason it replaced copper as the standard for long overhead transmission lines.
Aluminum is approximately 30% the weight of copper for the same conductance, directly influencing the total project economy.
C is correct тАФ Economy is the primary driver for using ACSR, as the lower material cost and reduced installation expenses (due to fewer towers) outweigh the conductivity advantage of copper.
Always remember that in competitive exams, if 'Economy' is an option for overhead conductor selection, it is almost always the correct answer due to the massive scale of transmission projects.