Join 60,000+ competitive exam aspirants
The steel cores used in ACSR conductors are usually
Alloy steel
Galvanized steel
Stainless steel
High speed steel
Galvanized steel
ACSR (Aluminum Conductor Steel Reinforced) conductors utilize a core of galvanized steel wires to provide the necessary mechanical strength and tensile resistance. The aluminum strands surrounding the core serve as the primary current-carrying medium.
ACSR (Aluminum Conductor Steel Reinforced) conductors utilize a core of galvanized steel wires to provide the necessary mechanical strength and tensile resistance. The aluminum strands surrounding the core serve as the primary current-carrying medium.
TtotalтАЛ=TAlтАЛ+TSteelтАЛ тАФ Total tensile strength is shared between Aluminum and Steel components
RACSRтАЛтЙИAAlтАЛ╧БlтАЛтАЛ тАФ Resistance dominated by Aluminum cross-section
The steel core is galvanized to prevent electrochemical corrosion caused by contact between the dissimilar metals (aluminum and steel). Galvanization involves coating the steel with a thin layer of zinc, which acts as a sacrificial anode, thereby extending the life of the conductor in harsh environmental conditions.
The core is strictly mechanical and carries very little current due to higher magnetic permeability and skin effect.
Steel wires are coated with zinc to prevent galvanic corrosion when in contact with aluminum.
ACSR is preferred for long-span transmission lines where mechanical sag must be minimized.
High mechanical strength-to-weight ratio
Reduces sag over long spans
Allows for longer tower spacing
Higher magnetic losses compared to all-aluminum conductors
Requires careful installation to avoid damaging the zinc coating
Extra High Voltage (EHV) transmission lines
Long-span distribution lines
River crossing spans
Galvanization typically adheres to ASTM A475 or IS 398 standards for high-tensile steel wire.
High-speed steel is a tool steel used for machining and is unsuitable for conductor applications.
B is correct тАФ Galvanized steel provides high tensile strength while the zinc coating prevents galvanic corrosion.
Always remember that in ACSR, the aluminum is for conductance and the steel is for mechanical strength; they are not intended to act as a single homogenous electrical conductor.