Join 60,000+ competitive exam aspirants
ACSR conductor implies
Aluminum conductor steel reinforced
All conductors surface treated and realigned
Anodized core steel reinforced
None of above
Aluminum conductor steel reinforced
ACSR stands for Aluminum Conductor Steel Reinforced. It is a specific type of high-capacity, high-strength stranded conductor used in overhead electrical transmission lines, consisting of a central core of steel surrounded by layers of aluminum wires.
ACSR stands for Aluminum Conductor Steel Reinforced. It is a specific type of high-capacity, high-strength stranded conductor used in overhead electrical transmission lines, consisting of a central core of steel surrounded by layers of aluminum wires.
R=╧БALтАЛ тАФ Ohm's law relation for resistance where aluminum provides the low ╧Б and large A.
TtotalтАЛ=TsteelтАЛ+TaluminumтАЛ тАФ Total tensile strength is contributed primarily by the steel core.
The steel core provides the necessary mechanical strength to support the conductor over long spans and withstand environmental stress like wind or ice loads. The outer aluminum strands provide high electrical conductivity, as aluminum is lightweight and offers a lower cost and better weight-to-conductivity ratio than copper.
Used for high-voltage transmission lines.
Steel core resists sagging over long spans.
Aluminum layers provide path for current flow.
The diameter is larger than an equivalent copper conductor, which reduces corona discharge.
High tensile strength to weight ratio.
Cost-effective compared to equivalent copper conductors.
Lower sag allowing longer spans between towers.
Susceptible to galvanic corrosion if not properly protected.
Higher diameter leads to increased wind resistance.
High Voltage (HV) transmission.
Extra High Voltage (EHV) transmission.
Long span distribution lines.
The steel core is typically galvanized to prevent rust.
Options B and C are distractors containing technically incorrect terminology related to conductor manufacturing.
A is correct тАФ ACSR stands for Aluminum Conductor Steel Reinforced, which combines the strength of steel with the conductivity of aluminum.
Always remember that in transmission lines, the skin effect causes current to flow primarily through the outer aluminum layers, justifying why the steel core does not need to be highly conductive.