Join 60,000+ competitive exam aspirants
In overhead line conductor used is
Copper conductor
All aluminum conductor
ACSR conductor
None of above
ACSR conductor
ACSR (Aluminum Conductor Steel Reinforced) is the standard choice for overhead power transmission lines. It consists of a central galvanized steel core surrounded by layers of stranded aluminum conductors, providing a balance of high mechanical strength and good electrical conductivity.
ACSR (Aluminum Conductor Steel Reinforced) is the standard choice for overhead power transmission lines. It consists of a central galvanized steel core surrounded by layers of stranded aluminum conductors, providing a balance of high mechanical strength and good electrical conductivity.
RACтАЛ=kтЛЕRDCтАЛ тАФ Effective AC resistance accounting for skin effect
PlossтАЛ=3I2R тАФ Power loss calculation per unit length
The steel core carries the mechanical tension, allowing for longer spans between transmission towers and reduced sag. The outer aluminum strands provide a low-resistance path for electric current, and because aluminum is lightweight and inexpensive compared to copper, it significantly reduces the overall cost and weight of the line.
The steel core prevents the conductor from stretching under its own weight or ice loading.
Aluminum is used for the conducting path due to its low density and cost-effectiveness.
Stranding allows the conductor to be flexible for ease of installation.
ACSR reduces the sag-tension problem, enabling the use of taller, more widely spaced towers.
High strength-to-weight ratio
Lower overall transmission cost
Reduced sag allows for fewer transmission towers
Excellent current carrying capacity
Larger diameter compared to copper increases wind load
Corrosion can occur at the interface of steel and aluminum if not treated
Higher skin effect compared to solid conductors
High Voltage (HV) transmission lines
Extra High Voltage (EHV) distribution networks
Long-span river crossings
The core is typically made of galvanized steel to prevent oxidation and corrosion.
Aluminum is chosen over copper because while it has higher resistance per unit area, its significantly lower density and price make it more efficient for large-scale transmission.
Option B (All aluminum) lacks sufficient tensile strength for long spans, and Option A (Copper) is too heavy and expensive for modern long-distance overhead transmission.
C is correct тАФ ACSR (Aluminum Conductor Steel Reinforced) is preferred for overhead lines because it combines the high mechanical strength of a steel core with the high electrical conductivity of aluminum.
Always remember: Aluminum for conductivity, Steel for strength. In power systems, ACSR is the industry standard for transmission, while AAC or AAAC is sometimes used in lower voltage distribution.