Join 60,000+ competitive exam aspirants
Aluminum is now most commonly used conductor in transmission line than copper because
It is more conductive
Its tensile strength is more
It is costlier
It is light in weight
It is light in weight
Aluminum is the preferred material for long-distance overhead transmission lines primarily due to its low density and cost-effectiveness compared to copper. Although copper has higher conductivity, aluminum's lightweight nature reduces the mechanical stress on transmission towers and allows for larger spans, significantly lowering the total cost of the infrastructure.
Aluminum is the preferred material for long-distance overhead transmission lines primarily due to its low density and cost-effectiveness compared to copper. Although copper has higher conductivity, aluminum's lightweight nature reduces the mechanical stress on transmission towers and allows for larger spans, significantly lowering the total cost of the infrastructure.
R=╧БAlтАЛ тАФ Resistance formula relating resistivity, length, and cross-sectional area
Weight┬аRatio=╧БCuтАЛ╧БAlтАЛтАЛ├Ч╧ГAlтАЛ╧ГCuтАЛтАЛтЙИ0.5 тАФ Demonstrates aluminum is approx 50% lighter for equal resistance
The design of transmission lines focuses on the strength-to-weight ratio and the cost per unit of resistance. Aluminum, while having a lower conductivity (61% of IACS) than copper, provides a much lower weight for the same resistance. By using Aluminum Conductor Steel Reinforced (ACSR), the mechanical tensile strength required to span long distances is provided by the steel core, while the aluminum provides the conductive path.
Aluminum is approximately 30% the weight of copper for an equal volume.
Higher conductivity of copper is offset by the economic benefits of aluminum.
ACSR (Aluminum Conductor Steel Reinforced) combines aluminum's conductivity with steel's high tensile strength.
Reduced weight leads to lower tower height requirements and cheaper foundation costs.
Significantly lower cost per unit length
Lower weight reduces mechanical load on towers
Allows for longer spans between supports
Requires a larger cross-sectional area for the same current capacity compared to copper
Lower mechanical strength (without steel reinforcement)
High-voltage transmission lines (HVAC/HVDC)
Distribution network overhead lines
| Feature | Aluminum | Copper |
|---|---|---|
Density | 2.7 g/cm┬│ | 8.9 g/cm┬│ |
Conductivity | 61% IACS | 100% IACS |
Option B is incorrect because copper has a higher tensile strength than pure aluminum; however, ACSR is used to bridge this gap.
Option A is incorrect as copper is more conductive than aluminum.
Option C is incorrect because aluminum is significantly cheaper than copper.
D is correct тАФ Aluminum's low density allows for reduced mechanical tower stress and cost-effective construction over long distances.
Always remember that for power transmission, the primary optimization parameter is the 'cost-per-ampere-meter' rather than pure conductivity.