Join 60,000+ competitive exam aspirants
Conductor radius r will have the factious radius rтАЩ for the inductance calculation
rтА▓=2r
rтА▓=r
rтА▓=0.7778r
rтА▓=0.778rтАЛ
rтА▓=0.7778r
The 'factitious' or 'geometric mean radius' (GMR), denoted as rтА▓, is an equivalent radius used in inductance calculations to account for the internal flux linkages within a conductor. For a solid cylindrical conductor of radius r, the GMR is calculated as rтА▓=reтИТ1/4, which numerically equals 0.7788r.
The 'factitious' or 'geometric mean radius' (GMR), denoted as rтА▓, is an equivalent radius used in inductance calculations to account for the internal flux linkages within a conductor. For a solid cylindrical conductor of radius r, the GMR is calculated as rтА▓=reтИТ1/4, which numerically equals 0.7788r.
L=2├Ч10тИТ7ln(rтА▓DeqтАЛтАЛ)H/m тАФ Inductance of a single-phase transmission line
rтА▓=reтИТ0.25 тАФ Definition of GMR for a solid cylindrical conductor
When current flows through a conductor, it produces magnetic flux both outside and inside the conductor. The internal flux linkage contributes to an internal inductance of 0.5├Ч10тИТ7H/m. By using the GMR (rтА▓) in the standard inductance formula, this internal flux linkage effect is mathematically simplified, allowing the conductor to be treated as a hollow tube with no internal flux.
GMR is also known as the Self Geometric Mean Distance (Self-GMD).
It accounts for internal magnetic flux linkages of the conductor.
The constant 0.7788 comes from eтИТ0.25.
GMR is always smaller than the physical radius r.
Simplifies inductance calculations for complex conductor arrangements.
Allows treating conductors as filaments for long-distance line analysis.
Not applicable directly to non-cylindrical or bundled conductors without specific geometric adjustments.
Calculation of series inductance in power transmission lines.
Analysis of short, medium, and long transmission line performance.
The factor 0.7788 is specific to a solid round conductor. For stranded conductors, the GMR is usually provided by the manufacturer or calculated based on the geometric arrangement of strands.
Option D suggests r/0.778, which would result in an increased radius, contradicting the physics of internal inductance flux.
C is correct тАФ The GMR (or rтА▓) of a solid cylindrical conductor is reтИТ1/4, which evaluates to approximately 0.7788r.
Always remember that rтА▓<r. If your calculated inductance results in a negative value or makes no sense, re-check the ratio in your logarithmic term ln(D/rтА▓).