Join 60,000+ competitive exam aspirants
An alternator is delivering a balanced load at unity power factor, the phase angle between line voltage and line current is
90°
60°
30°
0°
30°
In a three-phase star-connected alternator system, the phase angle between line voltage and phase voltage is 30°. When the power factor is unity, the phase current is in phase with the phase voltage, meaning the line current (which is equal to the phase current in star connection) maintains a 30° phase angle relative to the line voltage.
In a three-phase star-connected alternator system, the phase angle between line voltage and phase voltage is 30°. When the power factor is unity, the phase current is in phase with the phase voltage, meaning the line current (which is equal to the phase current in star connection) maintains a 30° phase angle relative to the line voltage.
VL=3Vph — Relationship between line and phase voltage in star connection
θ=cos−1(pf) — Phase angle calculation where pf=1.0 implies θ=0 for phase quantities
In a balanced star-connected load, the relationship between line voltage VL and phase voltage Vph is VL=3Vph. The line voltage vector is defined by the difference between two phase voltages. Geometrically, the line voltage phasor lags/leads the corresponding phase voltage by 30°. At unity power factor, the current vector coincides with the phase voltage vector, resulting in a 30° angle between the line voltage and the line current.
The 30° shift arises specifically due to the vector difference of two phase voltages in a star-connected system.
At unity power factor, the phase voltage and phase current are perfectly aligned.
Line current equals phase current in star-connected windings.
This angle is a fundamental property of three-phase line-to-line measurements compared to phase-to-neutral measurements.
Provides a stable reference for three-phase power measurement.
Simplifies calculations for balanced three-phase systems.
Often confused with the internal load power factor angle.
Specific only to star (wye) connections; delta connections differ.
Power system analysis for generators and transformers.
Calibration of three-phase wattmeters and energy meters.
The question assumes a star-connected alternator. If it were a delta connection, the phase current would lag the line current by 30°.
Option D (0°) represents the angle between phase voltage and phase current at unity power factor, which is a common distractor.
C is correct — In a balanced star-connected alternator, the line voltage leads the corresponding phase voltage by 30°, resulting in a 30° phase angle between line voltage and line current at unity power factor.
Always verify if the system is star or delta connected, as line-to-phase relationships for current and voltage are inverted between these two configurations.