Join 60,000+ competitive exam aspirants
An anemometer is an instrument used for measurement of
Solar radiation
Wind speed
Temperature gradients
Swept area
Wind speed
An anemometer is a standard meteorological and engineering instrument specifically designed to measure wind speed or the velocity of a gas stream. It serves as a vital component in wind energy systems for assessing potential power generation at a site and for monitoring operational conditions.
An anemometer is a standard meteorological and engineering instrument specifically designed to measure wind speed or the velocity of a gas stream. It serves as a vital component in wind energy systems for assessing potential power generation at a site and for monitoring operational conditions.
P=21тАЛ╧БAv3 тАФ Kinetic power available in wind, where v is wind speed measured by anemometer.
v=kтЛЕ╧Й тАФ Relation between wind velocity v and angular speed ╧Й of anemometer cups.
The most common type, the cup anemometer, uses rotating cups mounted on a vertical shaft. As wind hits the cups, it creates a drag force that causes the shaft to rotate at a speed proportional to the wind velocity (v). This rotation is converted into an electrical signal using a magnetic sensor or a small DC generator, allowing for real-time monitoring of airflow velocity.
Used extensively in Wind Power Plants (WPP) to determine cut-in and cut-out speeds.
Cup anemometers are standard for industrial weather monitoring.
Hot-wire anemometers are used for precise measurement of turbulent airflow.
A wind vane is often paired with an anemometer to determine wind direction.
Real-time monitoring of environmental conditions
Essential for safety systems (e.g., wind turbine braking at high speeds)
Critical for wind resource assessment studies
Susceptible to mechanical wear in cup-based models
Can be affected by icing conditions in cold climates
Requires proper calibration to account for site turbulence
Wind turbine control and optimization
Meteorological weather stations
HVAC system airflow balancing
Aviation safety for take-off and landing
Option A (Solar radiation) is measured using a Pyranometer.
Option C (Temperature gradients) is typically measured using Thermocouples or RTDs.
Option D (Swept area) is a geometric parameter of the turbine rotor, calculated as A=╧Аr2.
B is correct тАФ Anemometers are specialized instruments calibrated to measure the speed or velocity of wind/air currents.
In wind power generation exams, always link 'Anemometer' to wind speed (input) and 'Pyranometer' to solar irradiance (input); confusing these is a common negative-marking trap.