Join 60,000+ competitive exam aspirants
Maximum capacity utilization of present wind power plants in India is about
5 - 10%
38 - 45%
80 - 90%
95 - 100%
38 - 45%
The Capacity Utilization Factor (CUF) of wind power plants in India typically ranges between 20% and 45%, depending on the site-specific wind speed profile and turbine technology. While global offshore standards can reach higher, 38-45% represents the upper bound of efficiency for high-performance, utility-scale wind farms in favorable regions like Tamil Nadu or Gujarat.
The Capacity Utilization Factor (CUF) of wind power plants in India typically ranges between 20% and 45%, depending on the site-specific wind speed profile and turbine technology. While global offshore standards can reach higher, 38-45% represents the upper bound of efficiency for high-performance, utility-scale wind farms in favorable regions like Tamil Nadu or Gujarat.
CUF=Rated┬аCapacity├Ч8760Actual┬аAnnual┬аGenerationтАЛ
PwindтАЛ=21тАЛ╧БAv3CpтАЛ
The CUF is defined as the ratio of the actual energy generated over a period to the potential energy that would have been generated if the plant operated at its rated capacity throughout that period. Because wind speed is stochastic and cubically related to power output (PтИЭv3), variability in wind velocity significantly impacts the average output relative to the peak rating.
CUF is highly dependent on the 'Wind Power Density' of the location.
Offshore wind plants in India are expected to have higher CUFs than onshore plants.
Indian wind energy is seasonal, with peak generation coinciding with the monsoon months.
Modern turbines utilize larger rotor diameters to improve capacity factors at lower wind speeds.
Zero fuel cost once the infrastructure is operational.
Minimal environmental impact compared to fossil fuel-based generation.
Intermittent nature of wind leads to grid stability challenges.
High capital cost for site exploration and transmission infrastructure.
Grid-connected utility-scale power generation.
Off-grid hybrid systems combined with solar PV.
Lower CUF ranges (e.g., 15-20%) are common in older wind farms with legacy technology.
The 80-90% range is characteristic of thermal power plants or nuclear base-load plants, not wind.
B is correct тАФ 38-45% represents the current maximum typical capacity utilization factor for optimized, high-performance utility-scale wind installations in India.
In exams, always distinguish between 'Efficiency' (energy conversion) and 'Capacity Factor' (time-based output). A wind turbine can be 40% efficient but have a much lower capacity factor due to wind intermittency.