Join 60,000+ competitive exam aspirants
As compared to AC transmission DC transmission is free from
Inductance
Capacitance
Phase displacement
All of above
All of above
DC transmission systems operate under steady-state conditions where the frequency is effectively zero (f=0 Hz). Consequently, phenomena inherent to AC systems such as inductive reactance (XLтАЛ=2╧АfL), capacitive reactance (XCтАЛ=2╧АfC1тАЛ), and phase shifting do not occur.
DC transmission systems operate under steady-state conditions where the frequency is effectively zero (f=0 Hz). Consequently, phenomena inherent to AC systems such as inductive reactance (XLтАЛ=2╧АfL), capacitive reactance (XCтАЛ=2╧АfC1тАЛ), and phase shifting do not occur.
XLтАЛ=2╧АfL тАФ Inductive reactance proportional to frequency
XCтАЛ=2╧АfC1тАЛ тАФ Capacitive reactance inversely proportional to frequency
In DC, the voltage and current are constant over time. Because the derivative of a constant is zero, the voltage drop across an inductor (v=LdtdiтАЛ) and the charging current of a capacitor (i=CdtdvтАЛ) are zero. Furthermore, since there is only a single magnitude without periodic variation, the concept of phase displacement between voltage and current vectors is non-existent.
DC transmission has no skin effect, leading to uniform current distribution across the conductor cross-section.
Absence of reactive power components (Q=0) means transmission capacity is limited only by thermal limits.
DC requires fewer conductors compared to a 3-phase AC system for the same power transfer.
No skin effect
No reactive power compensation required
Lower dielectric stress on insulation
No stability limits like AC transmission
High cost of converter stations (rectifiers/inverters)
Difficult to step up or step down voltage compared to transformers
Circuit breaking is complex due to the absence of natural current zeros
Long-distance bulk power transmission
Interconnection of asynchronous power grids
Submarine cable transmission
| Feature | AC Transmission | DC Transmission |
|---|---|---|
Frequency | 50/60 Hz | 0 Hz |
Reactance | Significant | Zero |
Since f=0 for DC, the impedance of the line is purely resistive (Z=R).
Option A, B, and C are all characteristics specifically tied to the periodic nature of AC voltage/current waveforms.
D is correct тАФ DC transmission is inherently free from frequency-dependent effects like inductance, capacitance, and phase displacement.
Always remember that in DC analysis, inductors act as short circuits and capacitors act as open circuits at steady state.