Join 60,000+ competitive exam aspirants
Consider below statement
┬аNo distance limitation related to steady state stability
┬аNo reactive power requirement from the system at the two terminals
┬аNo substantial effect on fault level of two systems at the terminal in-spite of interconnection
┬аNo corona problem
What are the advantages of HVDC transmission?
All of above
1 and 3
2 and 4
3 and 4
All of above
HVDC (High Voltage Direct Current) transmission systems offer significant operational advantages over HVAC systems, including no distance limitations related to stability, no reactive power compensation requirements at line terminals for power transfer, and the ability to interconnect asynchronous grids without increasing fault levels. Furthermore, because HVDC is typically operated at voltages optimized for the specific insulation and corona constraints of the cable or conductor, the corona effect is significantly minimized compared to high-voltage AC lines.
HVDC (High Voltage Direct Current) transmission systems offer significant operational advantages over HVAC systems, including no distance limitations related to stability, no reactive power compensation requirements at line terminals for power transfer, and the ability to interconnect asynchronous grids without increasing fault levels. Furthermore, because HVDC is typically operated at voltages optimized for the specific insulation and corona constraints of the cable or conductor, the corona effect is significantly minimized compared to high-voltage AC lines.
P=XV1тАЛV2тАЛтАЛsin╬┤ тАФ Power transfer equation for AC transmission highlighting stability limits
IcoronaтАЛтИЭf(V,r,d) тАФ Relation showing dependence of corona on voltage/frequency
HVDC operates using power electronic converters (rectifiers and inverters) to convert AC to DC for transmission and back to AC at the receiving end. Since DC does not have a frequency, the power transfer is decoupled from the impedance of the line (Z=R+jX), eliminating the steady-state stability limit (P=XV1тАЛV2тАЛтАЛsin╬┤) which governs AC systems. The absence of reactive power requirement occurs because DC does not have an inductive reactance effect (XLтАЛ) that requires capacitive support along the line, and the DC converters act as independent control nodes.
HVDC lines do not suffer from the 'stability limit' associated with the load angle ╬┤ in AC systems.
Since DC has zero frequency, there is no reactive power consumption due to line inductance or capacitance.
HVDC links connect two AC grids without increasing the Short Circuit Level (SCL), acting as a 'firewall' against cascading faults.
Corona loss is reduced in HVDC as the electric field around the conductor is less sensitive to harmonic-induced voltage spikes.
No steady-state stability limit (no ╬┤ constraint).
No line charging reactive power requirement.
Asynchronous interconnection.
Lower corona loss and Radio Interference (RI).
Expensive converter stations.
Generation of harmonics requiring expensive filters.
Complex control and protection systems.
Long-distance bulk power transmission.
Undersea/Underground cable connections.
Interconnection of asynchronous AC grids.
The inability of DC to naturally cross-zero makes HVDC circuit breakers more complex than standard AC breakers.
The fault level at terminal stations is limited by the converter stations themselves, not the power transfer line impedance.
A is correct тАФ All listed points correctly identify the fundamental technical advantages of utilizing HVDC technology over conventional HVAC systems.
Always remember that in HVDC, power flow is controlled by converter firing angles, whereas in HVAC, it is controlled by the line reactance and phase angle difference.