Join 60,000+ competitive exam aspirants
Ash content of coal can be reduced by
Pulverizing
Washing
Slow burning
Mixing with high grade coal
Washing
Ash content in coal is defined as the non-combustible mineral matter present in the coal matrix. Coal washing, also known as coal beneficiation or coal preparation, is a physical separation process used to remove impurities like shale, clay, and pyrite based on the difference in specific gravity between pure coal and mineral impurities.
Ash content in coal is defined as the non-combustible mineral matter present in the coal matrix. Coal washing, also known as coal beneficiation or coal preparation, is a physical separation process used to remove impurities like shale, clay, and pyrite based on the difference in specific gravity between pure coal and mineral impurities.
Specific┬аGravity┬аDifference=╧БashтАЛтИТ╧БcoalтАЛ
The principle relies on the density differential between coal (typically light, density 1.3тАУ1.5 g/cc) and mineral matter (typically heavy, density > 2.0 g/cc). Using media like water (jigging), heavy liquids, or air-fluidized beds, the lighter coal particles float or are carried away, while the heavier ash-forming mineral particles sink, effectively cleaning the fuel.
Ash content reduces the calorific value of coal significantly.
Coal washing improves the boiler efficiency in thermal power plants.
Higher ash content leads to increased wear and tear on pulverizers and ash handling equipment.
Transportation costs are reduced because non-combustible material is removed before shipping.
Increases heating value per unit weight.
Reduces ash disposal requirements and environmental pollutants (SOx).
Decreases slagging and fouling tendencies in the boiler furnace.
Requires significant amounts of water and subsequent water treatment.
Loss of fine coal particles in the effluent stream.
Adds capital and operational cost to the power plant generation cycle.
Thermal power plants using low-grade Indian coal.
Metallurgical coal preparation for steel industries.
Cement manufacturing kilns.
In India, coal is often high in ash (sometimes 30-45%), making washing a critical step for modern supercritical power units.
Pulverizing reduces coal size to powder to increase surface area for rapid combustion but does not remove existing mineral matter.
B is correct тАФ Coal washing utilizes the density difference between coal and ash-forming minerals to separate impurities, thereby reducing the total ash percentage.
Always remember that while 'Pulverizing' helps in the combustion process by increasing surface area, it is a size-reduction technique, not a purification technique for mineral matter.