Join 60,000+ competitive exam aspirants
Combustible elements in the fuel are
Carbon and hydrogen
Carbon, hydrogen and ash
Carbon, hydrogen and sulphur
Carbon, nitrogen and ash
Carbon, hydrogen and sulphur
Combustible elements in a fuel are the chemical components that undergo oxidation (combustion) and release energy. The primary combustible elements found in coal and other fossil fuels are Carbon (C), Hydrogen (H), and Sulphur (S).
Combustible elements in a fuel are the chemical components that undergo oxidation (combustion) and release energy. The primary combustible elements found in coal and other fossil fuels are Carbon (C), Hydrogen (H), and Sulphur (S).
C+O2тАЛтЖТCO2тАЛ+94.43kcal
2H2тАЛ+O2тАЛтЖТ2H2тАЛO+68.5kcal
S+O2тАЛтЖТSO2тАЛ+70.5kcal
During combustion, Carbon reacts with oxygen to form CO2тАЛ or CO, Hydrogen reacts to form water vapor (H2тАЛO), and Sulphur reacts to form SO2тАЛ. These reactions are exothermic, providing the thermal energy required for power generation. Ash and Nitrogen are non-combustible components; ash is the mineral residue that remains after combustion, and Nitrogen is an inert gas that absorbs heat without contributing to energy release.
Carbon is the most significant heat-producing element in solid fuels.
Hydrogen has the highest calorific value per unit mass but is usually present in smaller quantities than carbon.
Sulphur provides a small amount of heat but its combustion product (SO2тАЛ) causes environmental pollution and equipment corrosion.
Ash is an impurity; higher ash content reduces the efficiency of the boiler and increases disposal requirements.
High carbon content increases the gross calorific value of coal.
Higher hydrogen content improves ignition characteristics.
Sulphur causes acid rain and cold-end corrosion in air preheaters.
High ash content leads to slagging and fouling of boiler tubes.
Thermal power plants
Internal combustion engines
Industrial furnace design
Option B is incorrect because ash is a non-combustible mineral impurity.
Option D is incorrect because nitrogen is chemically inert during typical combustion conditions and does not contribute to calorific value.
C is correct тАФ The combustible elements that contribute to the heat value of fuel are Carbon, Hydrogen, and Sulphur.
Always remember that during an Ultimate Analysis of coal, moisture, ash, and nitrogen are non-combustible, whereas C, H, and S are the combustible contributors.