Join 60,000+ competitive exam aspirants
At NTP the breakdown strength of air is
30┬аkVrmsтАЛ/cm
30┬аkVpeakтАЛ/cm
40┬аkVpeakтАЛ/cm
60┬аkVpeakтАЛ/cm
30┬аkVpeakтАЛ/cm
At Normal Temperature and Pressure (NTP), the dielectric strength of air is approximately 30 kV peak per cm. This value represents the maximum electric field intensity that air can withstand before ionization occurs, leading to a conductive path or discharge.
At Normal Temperature and Pressure (NTP), the dielectric strength of air is approximately 30 kV peak per cm. This value represents the maximum electric field intensity that air can withstand before ionization occurs, leading to a conductive path or discharge.
EbreakdownтАЛтЙИ30┬аkVpeakтАЛ/cm тАФ The standard dielectric strength of air at NTP
The breakdown occurs when the electric field stress exceeds the air's ability to maintain its insulating state. Electrons gain sufficient kinetic energy to cause impact ionization of neutral air molecules, creating an avalanche effect known as Townsend discharge. This process results in the rapid growth of plasma, manifesting as a spark or corona discharge.
NTP stands for Normal Temperature (20┬░C) and Pressure (760 mmHg).
Dielectric strength is non-linear and depends on electrode geometry, pressure, and temperature.
This value is critical in the design of overhead transmission lines and high-voltage equipment insulation.
Paschen's law governs the relationship between breakdown voltage, pressure, and gap distance.
Self-restoring nature after a transient discharge
Abundant and low-cost insulating medium
Susceptibility to moisture and humidity
Performance degrades at higher altitudes due to lower air density
Insulation for overhead transmission lines
Air-blast circuit breakers
Switchgear arc quenching chambers
The peak value is used because dielectric breakdown is dependent on the instantaneous maximum field stress, not the RMS value.
The term 'rms' in option A is misleading because dielectric failure is a peak-stress-related phenomenon.
At higher pressures, the breakdown strength increases according to Paschen's Law.
B is correct тАФ The dielectric strength of air at NTP is defined as 30 kVpeakтАЛ/cm, representing the threshold for electrical breakdown.
Remember that insulation coordination studies always utilize peak voltages because dielectric failure occurs when the instantaneous voltage exceeds the material's withstand capability.