Join 60,000+ competitive exam aspirants
At relatively light load, transformer efficiency is low because
Secondary output is low
transformer losses are high
fixed loss is high in proportion to the output
Cu loss is small
fixed loss is high in proportion to the output
Transformer efficiency at light load is low primarily due to the high proportion of fixed losses compared to the output power. At these loads, the variable copper losses are minimal, making fixed losses more significant in proportion.
Transformer efficiency at light load is low primarily due to the high proportion of fixed losses compared to the output power. At these loads, the variable copper losses are minimal, making fixed losses more significant in proportion.
╬╖=PoutputтАЛ+PlossesтАЛPoutputтАЛтАЛ тАФ Efficiency of transformer
PfixedтАЛ=PcoreтАЛ+PeddyтАЛ тАФ Total fixed losses
Transformers experience core losses (hysteresis and eddy current) which are fixed regardless of the load. Under light loads, since the output power is lower, these fixed losses consume a larger percentage of the total output, leading to reduced efficiency.
At light load, core losses are not reduced, affecting efficiency significantly.
Copper losses (I┬▓R losses) are lower at light loads.
Understanding efficiency helps in better transformer selection for applications.
Knowledge of losses aids in enhancing performance and reducing operational costs.
Fixed losses remain constant regardless of the load which can be a drawback.
At low loads, transformers might operate less efficiently than required.
Power distribution where varies in load can result in different efficiency levels.
Electrical systems that continuously experience light loads.
Fixed losses typically include core or iron losses which are constant in operation.
Option A is incorrect as secondary output being low does not directly relate to efficiency but rather to power output.
C is correct тАФ Fixed losses are high in proportion to the output at light load, thus reducing efficiency.
Remember that efficiency is not only about output power but also the relationship between losses and load.