Join 60,000+ competitive exam aspirants
Boiling down of boiler water is done so as to
Control the solid concentration in the boiler water by removing some of the concentrated saline water
Remove dissolved gases in the water
Reduce boiler pressure
Increase steam temperature
Control the solid concentration in the boiler water by removing some of the concentrated saline water
Boiling down, commonly known as 'blowdown', is the process of periodically or continuously removing a portion of the boiler water to prevent the excessive buildup of dissolved solids and impurities. As water evaporates into steam, the concentration of dissolved minerals and salts increases, which if left unchecked, leads to scale formation and corrosion on the heating surfaces.
Boiling down, commonly known as 'blowdown', is the process of periodically or continuously removing a portion of the boiler water to prevent the excessive buildup of dissolved solids and impurities. As water evaporates into steam, the concentration of dissolved minerals and salts increases, which if left unchecked, leads to scale formation and corrosion on the heating surfaces.
TDSnewтАЛ=QoutтАЛTDSinтАЛ├ЧQinтАЛтАЛ тАФ simplified steady-state concentration relationship for dissolved solids
In a steam boiler, pure water evaporates, but dissolved solids remain in the liquid phase. Over time, the concentration of these solids (TDS) rises. By opening a blowdown valve, high-density saline water is discharged and replaced with make-up water of lower conductivity, effectively maintaining the total dissolved solids (TDS) within the recommended chemical operating limits of the boiler.
Boiler blowdown is essential to prevent carryover and scale deposition.
Excessive solids in water lead to 'priming' and 'foaming' of steam.
Blowdown can be manual (intermittent) or automated (continuous).
Heat recovery systems are often used with continuous blowdown to improve thermal efficiency.
Prevents scale and sludge accumulation
Reduces risk of boiler tube overheating and corrosion
Maintains high steam purity
Results in significant thermal energy loss if not recovered
Requires constant monitoring of water chemistry
High-pressure industrial steam boilers
Thermal power plants
Process heating systems
TDS (Total Dissolved Solids) must be kept below manufacturer-specified limits to avoid tube failure.
Option B (removing dissolved gases) is performed by a Deaerator, not blowdown.
Option C (pressure reduction) is handled by safety valves or firing rate controllers.
Option D (increase steam temperature) is controlled by the superheater.
A is correct тАФ Boiling down (blowdown) is the systematic removal of concentrated boiler water to maintain the total dissolved solids (TDS) at safe levels, preventing scale and corrosion.
Always remember that blowdown handles impurities/solids, whereas deaeration handles dissolved gases like O2тАЛ and CO2тАЛ to prevent electrochemical corrosion.