Join 60,000+ competitive exam aspirants
Calculate the reading that will be given by a hot-wire voltmeter when it is connected across the terminals of a generator whose voltage is given by V(t) = (2 Sin wt + 3 Sin 3 wt +5 Sin 5 wt) Volt.





A hot-wire voltmeter is a type of electrothermic instrument that measures the root-mean-square (RMS) value of an alternating current or voltage. For a non-sinusoidal waveform defined as a sum of harmonic components V(t)=тИСVnтАЛsin(n╧Йt), the total RMS value is calculated as the square root of the sum of the squares of the RMS values of each individual harmonic.
A hot-wire voltmeter is a type of electrothermic instrument that measures the root-mean-square (RMS) value of an alternating current or voltage. For a non-sinusoidal waveform defined as a sum of harmonic components V(t)=тИСVnтАЛsin(n╧Йt), the total RMS value is calculated as the square root of the sum of the squares of the RMS values of each individual harmonic.
Think of it like a lightbulb; it doesn't care if the voltage is a perfect sine wave or a complex signal, it simply gets bright based on the total power dissipated (which is proportional to the squared average), just like the hot-wire meter.
VRMSтАЛ=2V12тАЛ+V22тАЛ+V32тАЛ+...тАЛтАЛ
VRMSтАЛ=2Vm12тАЛтАЛ+2Vm32тАЛтАЛ+2Vm52тАЛтАЛтАЛ
The hot-wire instrument works on the thermal effect of electric current, where the current passes through a wire causing it to heat up and expand. The expansion of the wire is proportional to the square of the current (HтИЭI2). Consequently, the meter naturally performs a mean-square calculation, and the calibrated scale provides the square root of the average of the squared waveform, which is the RMS value.
Hot-wire instruments respond to the square of the input signal (true RMS reading).
RMS value of a sum of different frequency harmonics is VRMS12тАЛ+VRMS22тАЛ+VRMS32тАЛтАЛ.
Given V(t)=2sin(╧Йt)+3sin(3╧Йt)+5sin(5╧Йt).
Calculation: VRMSтАЛ=222тАЛ+232тАЛ+252тАЛтАЛ=24+9+25тАЛтАЛ=238тАЛтАЛ=19тАЛ.
Measures both AC and DC.
Reading is independent of waveform shape (True RMS).
Free from hysteresis and eddy current errors.
Slow response time.
Consumes significant power.
Fragile due to the thin wire construction.
Measurement of high-frequency alternating voltages.
Standardization in calibration of other AC voltmeters.
The peak amplitudes are 2, 3, and 5 volts. The RMS value of a sine wave VmтАЛsin(╧Йt) is 2тАЛVmтАЛтАЛ.
Option B (38тАЛ) assumes the sum of peak squares without the 21тАЛ scaling factor, which is incorrect.
The final result is 19тАЛтЙИ4.36 volts.
A is correct тАФ The hot-wire voltmeter indicates the RMS value, calculated as 222тАЛ+232тАЛ+252тАЛтАЛ=19тАЛ volts.
Always remember that for non-sinusoidal waveforms, the total RMS value is always the root of the sum of the squares of individual harmonic RMS components; do not just add the peak values.