Join 60,000+ competitive exam aspirants
Change in frequency without altering the number of poles keeps dispersion co-efficient ____________.
pulsating
impulsive
unchanged
all of these
unchanged
The dispersion coefficient (╧Г) of an induction motor depends primarily on the geometric arrangement and the number of slots/poles, which remain constant. Since ╧Г is defined by the ratio of leakage reactances to magnetizing reactance, and both reactances are proportional to frequency, the frequency terms cancel out, leaving the coefficient unchanged.
The dispersion coefficient (╧Г) of an induction motor depends primarily on the geometric arrangement and the number of slots/poles, which remain constant. Since ╧Г is defined by the ratio of leakage reactances to magnetizing reactance, and both reactances are proportional to frequency, the frequency terms cancel out, leaving the coefficient unchanged.
╧ГтЙИXmagnetizingтАЛXleakageтАЛтАЛ тАФ ratio of reactances
╧Г=1тИТL1тАЛL2тАЛM2тАЛ тАФ coefficient definition in terms of inductances
The dispersion coefficient is given by ╧Г=1тИТL1тАЛL2тАЛM2тАЛ, where M is the mutual inductance and L1тАЛ,L2тАЛ are self-inductances. Since M, L1тАЛ, and L2тАЛ are all proportional to the permeance of the flux path, changing the frequency does not alter the geometry of the magnetic circuit. Because both the magnetizing and leakage reactances scale linearly with frequency (╧ЙL), their ratio remains invariant.
Dispersion coefficient is purely a function of machine geometry.
Changing supply frequency f affects both leakage and magnetizing reactance equally.
The number of poles P dictates the synchronous speed, but does not affect the per-phase dispersion if the winding layout remains the same.
A lower dispersion coefficient is desirable for a high power factor induction motor.
Stable performance under variable frequency drives (VFD).
Predictable power factor characteristics.
High dispersion coefficient leads to poor power factor.
Leakage reactance dominates in machines with large air gaps.
Induction motor design optimization.
Analyzing transient behavior in asynchronous machines.
The dispersion coefficient is often represented as ╧Г. In small motors, it typically ranges from 0.05 to 0.15.
Option A and B are incorrect as the dispersion coefficient is a physical property of the magnetic circuit geometry, not a transient phenomenon like pulsation or impulse.
C is correct тАФ The dispersion coefficient depends only on the physical dimensions and leakage paths of the machine, which are unaffected by variations in frequency.
In any magnetic circuit analysis, if a parameter is defined as a ratio of two inductances, it is almost certainly independent of frequency, assuming no saturation occurs.