Join 60,000+ competitive exam aspirants
If the frequency is reduced and the same number of poles are used, then the full load input of the three-phase induction motor is __________.
increase
reduced
remain unchanged
cant say anything
reduced
When the supply frequency (f) is reduced while keeping the number of poles (P) constant, the synchronous speed (NsтАЛ) of the three-phase induction motor decreases. Consequently, since the power output and torque requirements of the load typically remain consistent at lower speeds, the power input is reduced to maintain electromagnetic balance.
When the supply frequency (f) is reduced while keeping the number of poles (P) constant, the synchronous speed (NsтАЛ) of the three-phase induction motor decreases. Consequently, since the power output and torque requirements of the load typically remain consistent at lower speeds, the power input is reduced to maintain electromagnetic balance.
NsтАЛ=P120fтАЛ тАФ Synchronous speed formula
╬жmтАЛтИЭfVтАЛ тАФ V/f control law for maintaining constant flux
The synchronous speed is governed by NsтАЛ=P120fтАЛ. Reducing f directly lowers NsтАЛ. According to the principle of flux density control, to avoid magnetic saturation, the terminal voltage (V) must be reduced proportionally with frequency to maintain the ratio fVтАЛтЙИconstant. Since PinтАЛтЙИ3тАЛVLтАЛILтАЛcos╧Х, a reduction in frequency (and thus V) leads to a reduction in the power input.
Frequency reduction at constant poles results in lower synchronous speed.
Constant V/f ratio must be maintained to prevent excessive stator current due to flux saturation.
Reducing input voltage alongside frequency leads to reduced power input at full load.
Allows variable speed operation
Maintains constant torque capability
Increased heating at very low frequencies
Lower power factor at low speeds
VFD (Variable Frequency Drives)
Industrial fan and pump speed control
For most AC motors, the torque is roughly proportional to the square of the voltage. If frequency is dropped without scaling voltage, the motor may saturate.
Option A is incorrect as frequency reduction reduces the back EMF and power handling capability.
B is correct тАФ Reducing the supply frequency with constant poles lowers the synchronous speed and subsequently the power input capacity of the motor.
Always remember the V/f law; in machines, frequency and voltage are rarely changed independently to ensure the air-gap flux remains constant.