Join 60,000+ competitive exam aspirants
Conductor carries more current on the surface in comparison to its core, this phenomena is called
Skin effect
Corona
Ferranti effect
LenzтАЩs effect
Skin effect
The phenomenon where an alternating current (AC) is non-uniformly distributed within a conductor, causing higher current density near the surface compared to the core, is known as the Skin Effect. This results in an effective increase in the resistance of the conductor at higher frequencies.
The phenomenon where an alternating current (AC) is non-uniformly distributed within a conductor, causing higher current density near the surface compared to the core, is known as the Skin Effect. This results in an effective increase in the resistance of the conductor at higher frequencies.
╬┤=╧Аf╬╝╧ГтАЛ1тАЛ тАФ where ╬┤is the skin depth, f is frequency, ╬╝is permeability, and ╧Гis conductivity.
RacтАЛ=RdcтАЛ(1+k) тАФ where RacтАЛ is AC resistance and RdcтАЛ is DC resistance.
The skin effect is caused by the opposing eddy currents induced by the changing magnetic field resulting from the AC current itself. According to Lenz's Law, the self-induced EMF is greatest at the center of the conductor where the flux linkage is highest, effectively 'pushing' the current toward the outer periphery (the skin). As frequency increases, the penetration depth (skin depth) decreases, further concentrating current at the surface.
Skin effect is negligible at DC (frequency = 0).
It increases with higher frequency, higher conductivity, and higher permeability of the conductor material.
Transmission lines often use ACSR (Aluminum Conductor Steel Reinforced) because the aluminum carries most of the current on the surface while steel provides structural strength.
Skin effect reduces the effective cross-sectional area of the conductor used for current conduction.
Useful in high-frequency applications like induction heating for surface hardening.
Increases the effective resistance of the conductor.
Leads to higher I┬▓с┤┐ power losses in transmission lines.
Design of power transmission lines.
High-frequency cable design (e.g., Litz wire).
Induction heating systems.
Corona is the ionization of air around the conductor at high voltage.
Ferranti effect is the rise in receiving end voltage over sending end voltage under light load conditions.
Lenz's Law governs the direction of induced EMF, which is the underlying physical principle for the skin effect.
A is correct тАФ The Skin effect is the tendency of an alternating electric current to become distributed within a conductor such that the current density is largest near the surface of the conductor.
Always remember that skin effect is frequency-dependent; for 50Hz transmission lines, the impact is small but non-negligible for large diameter conductors, whereas it is dominant in high-frequency radio applications.