Join 60,000+ competitive exam aspirants
When alternating current flows through a conductor
Entire current passes through the core of conductor
Portion of conductor near the surface caries more current in comparison to the core
Current remains uniformly distributed over the whole cross section of conductor
Portion of conductor near the surface carries less current in comparison to the core
Portion of conductor near the surface caries more current in comparison to the core
When an alternating current flows through a conductor, it does not distribute itself uniformly over the cross-section. Instead, the current density is higher near the surface of the conductor and decreases towards the core, a phenomenon known as the 'Skin Effect'.
When an alternating current flows through a conductor, it does not distribute itself uniformly over the cross-section. Instead, the current density is higher near the surface of the conductor and decreases towards the core, a phenomenon known as the 'Skin Effect'.
RacтАЛ>RdcтАЛ тАФ indicating effective resistance is higher in AC due to skin effect
╬┤=╧Аf╬╝╧Г1тАЛтАЛ тАФ skin depth calculation, where ╬┤ is the depth at which current density falls to 1/e of surface value
The Skin Effect occurs due to the non-uniform distribution of self-induced eddy currents within the conductor. As AC changes direction, the changing magnetic flux creates eddy currents that oppose the main current flow at the center of the conductor more intensely than at the surface. Consequently, the effective resistance of the conductor increases at higher frequencies.
Skin effect increases as frequency increases.
Skin effect is negligible in DC circuits because the frequency is zero.
The depth of penetration decreases as frequency, permeability, or conductivity increases.
Stranded conductors are used in overhead lines to mitigate skin effect.
Skin effect shielding can be used in high-frequency signal transmission to protect internal components.
Increases AC resistance, leading to higher I2R power losses.
Causes inefficient utilization of the conductor material.
Increases voltage drop along the transmission line.
Overhead transmission lines
High-frequency cables (RF cables)
Transformer design
Option A is the opposite of the skin effect phenomenon.
Option C describes the current distribution in a DC circuit.
Option D is factually incorrect regarding the physics of EM wave propagation in conductors.
B is correct тАФ due to the Skin Effect, the interior of the conductor experiences higher self-inductance than the surface, forcing the current to flow mostly through the outer skin.
Always remember that skin effect is frequency-dependent; for 50Hz transmission, the effect is small but significant enough to justify using ACSR conductors (Aluminum Conductor Steel Reinforced) with steel cores.