Join 60,000+ competitive exam aspirants
Connected load means
Installed electrical load in the premises of a consumer
Maximum load of a consumer
Load drawn by a consumer at any instant
None of above
Installed electrical load in the premises of a consumer
Connected load is defined as the sum of the continuous ratings of all the electrical apparatus or equipment installed on the premises of a consumer. It represents the total potential load that could be active if all equipment were switched on simultaneously.
Connected load is defined as the sum of the continuous ratings of all the electrical apparatus or equipment installed on the premises of a consumer. It represents the total potential load that could be active if all equipment were switched on simultaneously.
PtotalтАЛ=тИСi=1nтАЛPrated,iтАЛ тАФ Total connected load is the summation of individual rated power inputs.
In electrical distribution, the connected load serves as the baseline for calculating the sanctioned load. It is the algebraic summation of the power ratings of all connected devices (lights, motors, appliances), usually measured in kilo-Watts (kW). Because all devices are rarely used at once, this value is always greater than or equal to the actual maximum demand.
It is the total power rating of all equipment connected to the supply system.
It is always constant for a given installation unless new equipment is added.
It does not account for the actual usage pattern or diversity of the load.
The 'Demand Factor' is defined as the ratio of Maximum Demand to Connected Load.
Serves as the basis for wiring design and circuit protection sizing.
Helps utility companies estimate potential peak demand scenarios.
Does not accurately reflect the actual power drawn at any specific time.
Leads to overestimation of transformer capacity if diversity is ignored.
Sanctioned load approval for domestic and industrial connections.
Selection of cables, switches, and fuse ratings for building installations.
Maximum Demand is the maximum power consumed over a specific time interval (e.g., 15 or 30 minutes).
Option B (Maximum load) is incorrect because it is only a subset of the total installed capacity.
Option C (Instantaneous load) represents the actual load at a specific moment, which changes constantly.
A is correct тАФ Connected load is the aggregate of all electrical equipment ratings installed in the consumer's premises.
Remember that Demand Factor = Connected┬аLoadMaximum┬аDemandтАЛ, which is always тЙд1.