Join 60,000+ competitive exam aspirants
Power system experiences peak demand from
Midnight to 8:00 AM
8:00 AM to 2:00 PM
00 PM to 6:00 PM
6:00 PM to 10:00 PM
6:00 PM to 10:00 PM
In a power system, peak demand refers to the period during the day when the aggregate electrical load is at its maximum. For most residential and commercial grids, this typically occurs in the evening hours when lighting, domestic appliances, and industrial shift transitions overlap.
In a power system, peak demand refers to the period during the day when the aggregate electrical load is at its maximum. For most residential and commercial grids, this typically occurs in the evening hours when lighting, domestic appliances, and industrial shift transitions overlap.
LfтАЛ=Maximum┬аDemandAverage┬аLoadтАЛ тАФ Load Factor calculation, illustrating the ratio between average and peak energy usage.
The load curve of a power system is influenced by human activity cycles. During the evening (approx. 6:00 PM to 10:00 PM), there is a simultaneous increase in demand due to the switching on of residential lighting, air conditioning, televisions, and cooking appliances, combined with commercial establishments that are still operational.
Peak load represents the highest power requirement on the grid in a given interval.
Power plants must be sized to meet the 'Peak Demand' plus a margin for reserve.
Diversity factor significantly affects the magnitude of the peak demand.
Utilities often employ Demand Side Management (DSM) to flatten the peak load.
Enables accurate sizing of generating units.
Facilitates efficient grid scheduling and load dispatching.
High peak demand requires expensive peaking power plants.
Increases grid stress and probability of voltage instability during peak hours.
Grid Capacity Planning
Tariff Design (Time of Use pricing)
Load Dispatching Centers (LDC)
Option A (Midnight to 8 AM) is typically the off-peak period (valley period).
Option B (8 AM to 2 PM) is usually the morning moderate load period.
Option C (00 PM to 6 PM) contains a typo and is generally considered part of the afternoon load, not the peak.
D is correct тАФ The peak demand typically occurs during the evening hours (6:00 PM to 10:00 PM) due to the heavy overlapping of residential and commercial lighting and appliance loads.
Always remember that Load Factor is inversely proportional to the peak demand; higher load factor implies a flatter curve, which is more economical for power generation.