Join 60,000+ competitive exam aspirants
Maximum demand on the power system is
Greatest of all short time interval average demand during the period
Instantaneous maximum value of kW supplied during a period
Instantaneous maximum value of kVA applied during the period
Maximum value of units supplied during the period
Greatest of all short time interval average demand during the period
Maximum demand is defined as the greatest of all short-time interval average demands recorded during a specified period (e.g., a day, month, or year). It represents the peak load that the power system must be capable of supplying, which determines the required capacity of the generating equipment and transmission/distribution network.
Maximum demand is defined as the greatest of all short-time interval average demands recorded during a specified period (e.g., a day, month, or year). It represents the peak load that the power system must be capable of supplying, which determines the required capacity of the generating equipment and transmission/distribution network.
MD=maxi=1nтАЛ(╬Фt1тАЛтИлtiтАЛtiтАЛ+╬ФtтАЛp(t)dt) тАФ Calculation of maximum demand over interval ╬Фt
DF=Connected┬аLoadMaximum┬аDemandтАЛ тАФ Definition of Demand Factor
In power systems, loads are fluctuating. To measure demand, an integrating demand meter is used with a specific time lag (typically 15, 30, or 60 minutes). The meter averages the power consumption over this window, and the maximum of these averaged values observed over the billing period is termed the Maximum Demand.
Maximum demand determines the installed capacity of the power plant.
The billing demand is often based on the maximum demand recorded over the billing cycle.
A higher maximum demand relative to the connected load indicates a higher demand factor.
Load factor is defined as Maximum┬аDemandAverage┬аDemandтАЛ.
Helps in sizing generators and transformers.
Enables accurate infrastructure cost recovery through demand charges.
Does not account for peak instantaneous power spikes smaller than the integration interval.
High maximum demand requires higher investment in reserves.
Electricity billing tariffs.
Grid capacity planning and load forecasting.
Setting protection relay thresholds.
Instantaneous power (Option B and C) is not used for maximum demand because short transients do not typically overload the thermal mass of power system equipment.
The interval duration is a standardized utility requirement to ensure measurement stability.
A is correct тАФ The maximum demand is defined as the greatest short-time average demand value recorded over a specified period.
Always remember that maximum demand is an 'averaged' value over a set time interval, not an 'instantaneous' peak, to account for the thermal time constants of electrical machinery.