Join 60,000+ competitive exam aspirants
Cross arms used in transmission line is made of
Aluminum
Copper
Steel
RCC
Steel
Cross arms in overhead transmission lines are primarily made of steel (channel or angle sections). They are mounted on the supporting structures (poles or towers) to provide the necessary support and mechanical clearance for the insulators holding the phase conductors.
Cross arms in overhead transmission lines are primarily made of steel (channel or angle sections). They are mounted on the supporting structures (poles or towers) to provide the necessary support and mechanical clearance for the insulators holding the phase conductors.
FtotalтАЛ=Ftension2тАЛ+Fwind2тАЛтАЛ тАФ Resultant mechanical force acting on the cross arm structure.
The cross arm acts as a structural cantilever beam designed to withstand mechanical loads including the tension of conductors, wind load, and the weight of the insulator strings. Steel is chosen because of its high tensile strength, structural rigidity, and ability to handle the severe mechanical stresses imposed by overhead lines across various climate conditions.
Steel cross arms provide excellent mechanical strength-to-weight ratios for transmission supports.
They are typically galvanized to prevent atmospheric corrosion.
The cross arm length determines the horizontal spacing between phase conductors to maintain required electrical clearance.
They are mounted perpendicular to the pole axis to support insulator strings.
High mechanical strength and durability
Cost-effective for high-voltage applications
Easy to fabricate and mount on steel towers
Prone to corrosion if not properly galvanized
Conductive nature requires careful insulation coordination
High Voltage (HV) and Extra High Voltage (EHV) transmission towers
Distribution lines using tubular or lattice steel poles
Steel is preferred over wood (which rots) and RCC (which is brittle and heavy) for most modern high-voltage transmission projects.
Option A (Aluminum) lacks the structural rigidity needed for long-span cross arms.
Option B (Copper) is too expensive and mechanically soft for structural support.
Option D (RCC) is used for pole structures but rarely as a standard cross arm material due to weight and fragility.
C is correct тАФ Cross arms are made of steel to provide the necessary structural strength to hold conductors and insulators under mechanical tension.
In transmission design, always remember that the cross arm length is dictated by the voltage level to prevent arcing between phase conductors (Electrical Clearance).