Join 60,000+ competitive exam aspirants
Conductors used in HV transmission lines are
Stranded
Solid
Both (a) and (b)
None of above
Stranded
High voltage (HV) transmission lines use stranded conductors to provide mechanical flexibility and to minimize the skin effect. Stranding involves twisting several smaller wire strands together, which makes the conductor easier to handle and install compared to a single rigid solid conductor.
High voltage (HV) transmission lines use stranded conductors to provide mechanical flexibility and to minimize the skin effect. Stranding involves twisting several smaller wire strands together, which makes the conductor easier to handle and install compared to a single rigid solid conductor.
RacтАЛ>RdcтАЛ тАФ representing the increase in resistance due to skin effect in transmission lines
L=2├Ч10тИТ7ln(rтА▓DтАЛ) тАФ calculating inductance per meter for overhead lines where rтА▓ is the effective GMR
The principle involves skin effect management and mechanical reliability. In AC systems, the current density is higher near the surface of the conductor. By using stranded conductors, the effective diameter increases slightly compared to a solid conductor of the same cross-section, reducing inductance and skin effect losses. Furthermore, stranded conductors are less prone to mechanical fatigue and brittle fracture due to wind-induced vibrations.
Stranded conductors are composed of multiple wires twisted in layers.
Stranding increases the mechanical flexibility, preventing wire breakage due to vibration.
The central strand is surrounded by successive layers with a varying direction of lay to prevent nesting.
ACSR (Aluminum Conductor Steel Reinforced) is the most common type of stranded conductor used in India for HV lines.
High mechanical strength when using ACSR
Flexible and easy to string on towers
Reduced skin effect for a given cross-sectional area
Less prone to vibration fatigue
Larger diameter increases wind and ice loading compared to solid wire
More complex manufacturing process
Higher risk of corrosion between strands if not treated
Long-distance power transmission lines
Distribution networks (ACSR conductors)
Substation busbars
| Feature | Stranded | Solid |
|---|---|---|
Flexibility | High | Low |
Skin Effect | Reduced | More Pronounced |
Solid conductors are only used for very short spans or secondary low-voltage house wiring due to their rigidity.
The term 'lay' refers to the pitch of the twist in stranded conductors.
A is correct тАФ Stranded conductors are used in HV transmission lines to provide the necessary mechanical flexibility and to improve performance under AC operating conditions.
Always remember that while solid conductors have better surface finish (less corona), the mechanical constraints and skin effect make stranded conductors the standard for overhead transmission.