Join 60,000+ competitive exam aspirants
Conductors used in HV transmission lines are stranded because of
Increased tensile strength
Ease in handling
Cheaper in cost
Reduction in resistivity
Ease in handling
Conductors in high voltage transmission lines are stranded rather than solid to provide flexibility. A solid conductor of large cross-sectional area would be extremely rigid, making it difficult to transport on reels and install on transmission towers.
Conductors in high voltage transmission lines are stranded rather than solid to provide flexibility. A solid conductor of large cross-sectional area would be extremely rigid, making it difficult to transport on reels and install on transmission towers.
N=3x2тИТ3x+1 тАФ Total number of strands in a stranded conductor where x is the number of layers.
Stranding involves twisting multiple small-diameter wires (strands) together in layers. This helical winding allows the conductor to bend without plastic deformation or fatigue, facilitating winding onto drums and handling during stringing operations.
Stranding improves mechanical flexibility during installation.
It helps in reducing the skin effect compared to a single large solid conductor.
The total cross-sectional area is maintained while gaining structural integrity.
ACSR (Aluminum Conductor Steel Reinforced) is a common type of stranded construction.
Increased flexibility for easier installation
Better vibration damping properties
Simplified manufacturing and transport on reels
Higher manufacturing cost compared to solid conductors
Slightly larger overall diameter for same effective cross-section
High Voltage (HV) overhead transmission lines
Extra High Voltage (EHV) distribution feeders
While stranded conductors have slightly higher resistance due to the length of each strand being longer than the conductor itself (the 'lay' factor), the trade-off is necessary for physical handling.
Option A is incorrect because while stranding may marginally distribute stresses, the primary reason for choosing it over solid wire is handling.
Option D is incorrect as stranding actually increases the effective length of the wire, leading to a minor increase in resistance.
B is correct тАФ Stranded conductors are used in HV lines primarily to provide the necessary flexibility for handling, transport, and installation that a single solid conductor of large cross-section would lack.
Always remember that while electrical efficiency (resistivity) is important, mechanical constraints in power systems often dictate the physical geometry of hardware.