Join 60,000+ competitive exam aspirants
Which type of copper wire is most suitable for power transmission?
Soft drawn
Medium drawn
Hard drawn
None of above
Hard drawn
Hard drawn copper is the preferred choice for overhead power transmission lines due to its superior mechanical strength and higher tensile strength compared to soft or medium drawn copper. The mechanical rigidity allows for greater spans between transmission towers with reduced sag, maintaining necessary ground clearance.
Hard drawn copper is the preferred choice for overhead power transmission lines due to its superior mechanical strength and higher tensile strength compared to soft or medium drawn copper. The mechanical rigidity allows for greater spans between transmission towers with reduced sag, maintaining necessary ground clearance.
S=8TwL2тАЛ тАФ where S is sag, w is weight per unit length, L is span length, and T is tension.
╧Г=AFтАЛ тАФ where ╧Г is the tensile stress, F is force, and A is the cross-sectional area.
The mechanical properties of copper are modified through the wire-drawing process. Hard drawing increases the tensile strength by inducing work-hardening (strain hardening) in the crystal lattice structure, which resists deformation under the weight of the conductor and environmental stresses like wind or ice loading. While this process slightly reduces the electrical conductivity, the trade-off is necessary to prevent structural failure of long-span transmission lines.
Hard drawn copper has a high ultimate tensile strength.
Higher mechanical strength is essential to withstand atmospheric conditions.
The reduction in sag directly impacts the design height of transmission towers.
Soft drawn copper is typically reserved for indoor wiring or windings due to its high ductility.
Higher mechanical resistance to environmental stress
Smaller sag allows for taller spans between towers
Increased longevity in outdoor environments
Slightly lower electrical conductivity than pure annealed copper
More rigid and difficult to bend during installation
Overhead transmission and distribution power lines
Trolley wires for electric railways
Heavy-duty outdoor electrical grounding systems
| Feature | Soft Drawn | Hard Drawn |
|---|---|---|
Tensile Strength | Low | High |
Ductility | High | Low |
Hard drawn copper is produced by cold drawing process without final annealing.
Option A (Soft drawn) is highly ductile and conductive but lacks the structural integrity required for overhead transmission.
Option B (Medium drawn) is a compromise but generally insufficient for high-tension spans compared to Hard drawn.
C is correct тАФ Hard drawn copper provides the high mechanical strength necessary to support its own weight over long spans in transmission systems.
Always remember that in transmission lines, mechanical strength (governed by stress ╧Г) is just as critical as electrical conductivity (╧ГcondтАЛ) to ensure system reliability.