Join 60,000+ competitive exam aspirants
What is the correct sequence of decreasing order of material for line conductor in terms of electrical conductivity
Hard drawn copper
Cadmium copper
Aluminum
Galvanised steel
1, 2, 4, 3
2, 1, 4, 3
2, 1, 3, 4
1, 2, 3, 4
1, 2, 3, 4
The electrical conductivity of conductor materials is inversely proportional to their resistivity. Hard-drawn copper has the highest conductivity (approx. 97% IACS), followed by cadmium copper (lower than pure copper due to alloying), aluminum (approx. 61% IACS), and finally galvanized steel (high resistivity, used for mechanical strength).
The electrical conductivity of conductor materials is inversely proportional to their resistivity. Hard-drawn copper has the highest conductivity (approx. 97% IACS), followed by cadmium copper (lower than pure copper due to alloying), aluminum (approx. 61% IACS), and finally galvanized steel (high resistivity, used for mechanical strength).
╧Г=╧Б1тАЛ тАФ Relation between conductivity and resistivity
R=╧БAlтАЛ тАФ Resistance formula showing effect of resistivity ╧Б on conductor length l and area A
Electrical conductivity (\sigma =$$\frac{1}{\rho}) depends on the crystalline structure and presence of impurities. Adding alloying elements like Cadmium increases tensile strength but introduces scattering centers for electrons, reducing conductivity. Aluminum is lighter and cheaper but has higher resistivity than copper. Galvanized steel, typically used as an earth wire or for mechanical reinforcement, has a high iron content, leading to higher magnetic losses and lower conductivity compared to non-magnetic conductors.
Hard drawn copper is the reference standard for overhead lines due to high mechanical strength and excellent conductivity.
Cadmium copper is used for long-span crossings; it offers higher tensile strength but slightly lower conductivity than pure copper.
Aluminum is preferred for transmission lines due to its low weight and cost-effectiveness despite lower conductivity.
Galvanized steel has very high resistance and is primarily used for its mechanical strength in the core of ACSR conductors or as earth wires.
Copper: High current density and low voltage drop.
Aluminum: Excellent strength-to-weight ratio for long-distance power transmission.
Copper: Higher cost and weight compared to aluminum.
Galvanized Steel: High electrical impedance; unsuitable as the primary current-carrying path.
Copper: Distribution systems and substation busbars.
Aluminum: Overhead EHV transmission lines (as ACSR).
Steel: Core of ACSR (Aluminium Conductor Steel Reinforced) conductors.
Hard-drawn copper conductivity is typically taken as 97% of the International Annealed Copper Standard (IACS).
Option D is the correct sequence as the conductivity decreases progressively from copper to alloys to aluminum and finally to steel.
D is correct тАФ The decreasing order of electrical conductivity for these materials is Hard drawn copper > Cadmium copper > Aluminum > Galvanised steel.
Always remember that while alloying materials like Cadmium increases mechanical strength, it almost always leads to a reduction in electrical conductivity.