Join 60,000+ competitive exam aspirants
Diameter of each stranded conductor is d then the diameter of n-layer stranded conductor is
(2n+1)d
3(n+1)d
(2nтИТ1)d
3(nтИТ1)d
(2n+1)d
In a stranded conductor, wires are arranged in concentric layers around a central wire. For a conductor with n layers of strands of diameter d, the total diameter D is given by (2n+1)d.
In a stranded conductor, wires are arranged in concentric layers around a central wire. For a conductor with n layers of strands of diameter d, the total diameter D is given by (2n+1)d.
D=(2n+1)d тАФ Formula for the overall diameter of a stranded conductor
N=1+3n(n+1) тАФ Total number of strands in an n-layer conductor
The central core is a single wire of diameter d. Each subsequent layer i increases the diameter by 2d (one strand width on each side). Summing the central strand and n layers, the total number of strands across the diameter is 1+2n. Therefore, the total diameter D=d+2nd=(2n+1)d.
The central core consists of exactly 1 strand.
Each additional layer n adds strands that effectively increase the radial dimension by d on both sides.
Stranded conductors provide flexibility compared to solid conductors of the same cross-sectional area.
This formula assumes a close-packed hexagonal arrangement of strands.
Increased mechanical flexibility for installation
Reduced skin effect losses compared to a solid conductor of equivalent cross-section
Resistance to fatigue failure under vibration
Higher manufacturing cost than solid conductors
Increased effective resistance due to stranding factor (spiral length > conductor length)
Requires more complex termination and jointing procedures
Overhead transmission lines (ACSR conductors)
Flexible wiring in industrial machinery
High-current power cables
For n=1, D=(2(1)+1)d=3d. This is the standard 7-strand configuration (1 core + 6 in the first layer).
Option B, C, and D are incorrect as they do not follow the geometric progression of hexagonal strand packing.
A is correct тАФ The total diameter of an n-layer stranded conductor is calculated as (2n+1)d.
Remember that while the diameter follows (2n+1)d, the number of strands follows 3n2+3n+1. Always verify the layer count before applying the formula.