Join 60,000+ competitive exam aspirants
What will happen when a line conductor of an overhead supply line breaks down and touches the earth?
Current flows to the earth
Supply voltage increases
No current flows in the conductor
None of above
Current flows to the earth
When an overhead line conductor breaks and touches the ground, it creates a direct electrical path between the high-potential conductor and the low-potential earth. This establishes a phase-to-ground fault, causing a surge of current to flow through the earth due to the potential difference.
When an overhead line conductor breaks and touches the ground, it creates a direct electrical path between the high-potential conductor and the low-potential earth. This establishes a phase-to-ground fault, causing a surge of current to flow through the earth due to the potential difference.
IfтАЛ=ZfтАЛVphaseтАЛтАЛ тАФ where IfтАЛ is the earth fault current and ZfтАЛ is the impedance of the fault path.
The earth acts as a large reservoir of charge and effectively maintains a zero-potential reference point (V=0). When a conductor carrying voltage VlineтАЛ touches the ground, the insulation barrier is removed, leading to a fault current determined by IfтАЛ=ZfтАЛVlineтАЛтАЛ, where ZfтАЛ is the fault impedance. This usually triggers protective relaying devices like earth fault relays or distance relays to isolate the faulted section.
The fault creates a low-impedance path to the neutral/ground reference.
The magnitude of the fault current depends heavily on the grounding system (e.g., solidly grounded vs. impedance grounded).
Such faults pose a severe risk of step and touch potential to humans and animals nearby.
Protection systems detect this as an imbalance in the current vector sum (Residual Current).
Severe risk of electrocution near the fault site.
Potential damage to overhead line components due to thermal stress from high fault currents.
Option B is incorrect because a short circuit to earth generally causes a voltage dip (sag) in the faulted phase, not an increase.
Option C is incorrect because the breakdown of the line completes the circuit through the earth, ensuring current flows.
A is correct тАФ The contact creates a short-circuit path to ground, causing high fault current to flow through the earth.
Always remember that in a solid ground fault, the faulted phase voltage drops towards zero, while the potential of the healthy phases relative to ground may rise in an ungrounded system.