Join 60,000+ competitive exam aspirants
Effect of ice deposition on conductor is to increase the
Weight of conductor
Transmission line loss
Resistance of conductor
Skin effect
Weight of conductor
Ice deposition on an overhead transmission line conductor increases the total cross-sectional area and the effective diameter of the conductor. Since ice has mass, its accumulation significantly increases the dead weight of the conductor system, necessitating higher mechanical strength for towers and supporting structures.
Ice deposition on an overhead transmission line conductor increases the total cross-sectional area and the effective diameter of the conductor. Since ice has mass, its accumulation significantly increases the dead weight of the conductor system, necessitating higher mechanical strength for towers and supporting structures.
WtotalтАЛ=WconductorтАЛ+WiceтАЛ тАФ Represents the total vertical force per unit length on the transmission tower
WiceтАЛ=╧БiceтАЛ├ЧAreaiceтАЛ тАФ Represents the weight contribution of the ice layer
When environmental conditions (low temperature and humidity) cause water vapor to freeze on a conductor, it forms a sheath of ice around the wire. This additional volume of ice acts as an added load due to gravity. The increased diameter also exposes the conductor to higher wind pressure, further increasing the resultant mechanical load (tension) on the insulators and towers.
Ice loading is a critical mechanical design parameter for transmission lines in cold climates.
The increased effective diameter also increases the wind load on the conductor.
Total resultant load on the conductor is calculated as T=(WconductorтАЛ+WiceтАЛ)2+(PwindтАЛ)2тАЛ.
Increased weight leads to higher conductor sag, which requires careful clearance management.
Increases mechanical stress on support towers
Increases risk of conductor breakage
Promotes galloping (large amplitude, low-frequency oscillation) of conductors
Mechanical design of high-voltage overhead lines
Structural analysis of transmission towers in mountainous regions
Option B (Transmission line loss) and Option C (Resistance) are primarily dependent on conductor temperature and material, not ice weight.
Option D (Skin effect) is a phenomenon related to AC frequency and current distribution, which remains independent of physical ice accretion.
A is correct тАФ The deposition of ice adds significant mass to the transmission conductor, thereby increasing its total effective weight per unit length.
Always remember that ice loading increases mechanical stress, whereas temperature increase leads to thermal expansion (sagging) without changing the conductor weight.