Join 60,000+ competitive exam aspirants
Effect of increase in temperature in overhead transmission lines is to
Increase the stress and length
Decrease the stress and length
Decrease the stress but increase the length
None of the above
Decrease the stress but increase the length
When the temperature of an overhead transmission line increases, the conductor undergoes thermal expansion, leading to an increase in its physical length. Since the distance between the support towers remains fixed, this increase in length causes the sag to increase, which subsequently reduces the tension (stress) acting on the conductor.
When the temperature of an overhead transmission line increases, the conductor undergoes thermal expansion, leading to an increase in its physical length. Since the distance between the support towers remains fixed, this increase in length causes the sag to increase, which subsequently reduces the tension (stress) acting on the conductor.
S=8TwL2тАЛ тАФ Sag formula showing inverse relationship between sag (S) and tension (T)
LtтАЛ=L0тАЛ(1+╬▒╬Фt) тАФ Thermal expansion formula for length change
The relationship is governed by the sag-tension formula. The sag S is directly proportional to the square of the span length L and inversely proportional to the tension T. As temperature t rises, the length of the conductor ltтАЛ=l0тАЛ(1+╬▒╬Фt) increases. Increased sag results in a lower tension according to the catenary equation, decreasing the mechanical stress on the line.
Thermal expansion increases conductor length.
Higher sag is a direct consequence of increased length between fixed points.
Stress (tension) is inversely related to sag for a constant weight and span.
Transmission lines are designed to handle sag variations during peak summer.
Reduces tension load on transmission tower structures during high heat.
Provides a natural buffer for mechanical contraction during winter.
Excessive sag may reduce ground clearance below safety regulations.
Increased risk of flashover to ground or trees due to lower clearance.
Power system design and tower spotting.
Calculation of clearance limits for high voltage lines.
The constant of proportionality ╬▒ is the coefficient of linear expansion of the conductor material (e.g., Copper or ACSR).
Option A is incorrect because increased length results in lower, not higher, tension.
Option B is incorrect because length increases, not decreases, with higher temperature.
C is correct тАФ Increase in temperature causes thermal expansion, increasing the sag which reduces the mechanical tension (stress) on the conductor.
Always remember that in transmission line sag calculations, Tension T and Sag S are inversely proportional: TтИЭS1тАЛ. Therefore, any condition increasing sag will always decrease tension.