Join 60,000+ competitive exam aspirants
Field weakening control method is used for the _________?
above rated speed
below rated speed
both A and B
none of the above
above rated speed
Field weakening control is a speed control technique for DC motors where the flux per pole is reduced to achieve speeds higher than the base (rated) speed. Since speed is inversely proportional to flux, reducing the excitation current increases the motor speed beyond its nameplate rating.
Field weakening control is a speed control technique for DC motors where the flux per pole is reduced to achieve speeds higher than the base (rated) speed. Since speed is inversely proportional to flux, reducing the excitation current increases the motor speed beyond its nameplate rating.
N=K╧ХVтИТIaтАЛRaтАЛтАЛ тАФ General speed equation for DC motors
NтИЭ╧Х1тАЛ тАФ Relationship between speed and flux under constant voltage
In a DC motor, the back EMF equation is EbтАЛ=60AP╧ХZNтАЛ. Rearranging for speed, we get N=P╧ХZEbтАЛ├Ч60AтАЛ. Assuming terminal voltage V is held constant, EbтАЛ remains approximately constant. Thus, NтИЭ╧Х1тАЛ. By inserting a variable resistor in series with the shunt field winding, the field current is decreased, which lowers the flux ╧Х, causing the motor to accelerate beyond its rated speed.
Used specifically for constant power applications.
Operates in the region above base speed because flux cannot be increased beyond saturation.
Speed regulation is poor in the field weakening range.
Torque decreases as speed increases (TтИЭ╧ХIaтАЛ).
High efficiency as no power is wasted in a series armature resistor.
Allows speeds significantly higher than the rated speed.
Torque decreases as speed increases.
Motor cooling may be affected at very high speeds due to reduced fan speed if self-ventilated.
Electric traction systems.
Machine tools requiring variable speed drives.
Winding machines.
Field weakening is limited by the mechanical centrifugal force on the armature windings.
Option B (below rated speed) is usually achieved via Armature Voltage Control (Ward-Leonard system).
A is correct тАФ Field weakening reduces the magnetic flux to increase the motor speed above its rated (base) value.
Always remember: Armature control is used for speeds below base speed (constant torque), while field weakening is used for speeds above base speed (constant power).