Join 60,000+ competitive exam aspirants
Armature resistance control method is used for the _______?
above rated speed
below rated speed
both 1 and 2
none of the above
below rated speed
The armature resistance control method is a technique used to vary the speed of a DC motor below its rated speed by inserting an external resistance in series with the armature circuit. This increase in total resistance causes a larger voltage drop across the armature, thereby reducing the back EMF (EbтАЛ) and consequently decreasing the speed.
The armature resistance control method is a technique used to vary the speed of a DC motor below its rated speed by inserting an external resistance in series with the armature circuit. This increase in total resistance causes a larger voltage drop across the armature, thereby reducing the back EMF (EbтАЛ) and consequently decreasing the speed.
N=KтЛЕ╬жVтИТIaтАЛ(RaтАЛ+RextтАЛ)тАЛ тАФ Relation between speed and armature resistance
PlossтАЛ=Ia2тАЛтЛЕRextтАЛ тАФ Power loss in the external resistor
The speed of a DC motor is given by the relation NтИЭ╬жEbтАЛтАЛ. Since EbтАЛ=VтИТIaтАЛ(RaтАЛ+RextтАЛ), increasing the external resistance RextтАЛ significantly reduces the back EMF for a given load current IaтАЛ. Because the flux ╬ж remains constant in this method, the reduction in EbтАЛ leads directly to a reduction in the motor speed.
It is a constant torque variable speed method.
The speed range is always below the rated speed.
This method is highly inefficient due to heavy I2R power loss in the external resistor.
It is primarily used for DC series motors where speed control is not required for long periods.
Simple and easy to implement.
Provides a wide range of speed control below the rated speed.
High power loss (low efficiency) due to energy dissipation in the resistance.
Poor speed regulation at lower speeds since any change in load current significantly affects the voltage drop across RextтАЛ.
Crane and hoist operations.
Traction systems using DC series motors.
The speed range is typically limited to prevent excessive power dissipation.
Option A (above rated speed) is achieved using Field Flux Control (Flux Weakening).
B is correct тАФ Armature resistance control increases voltage drop in the armature circuit, which lowers the back EMF and reduces motor speed below its rated value.
Always remember: Flux control is used for speeds 'above' rated, while Armature/Voltage control is used for speeds 'below' rated.