Join 60,000+ competitive exam aspirants
Floating neutral in a three phase supply is considered undesirable as it causes
High voltage across the load
Low voltage across the load
Unequal line voltages across the load
None of above
Unequal line voltages across the load
A floating neutral in a three-phase star-connected system occurs when the neutral point is disconnected or has an infinite impedance to ground. This results in the star point potential shifting away from the system neutral, causing the phase voltages to become unbalanced depending on the magnitude of the loads connected to each phase.
A floating neutral in a three-phase star-connected system occurs when the neutral point is disconnected or has an infinite impedance to ground. This results in the star point potential shifting away from the system neutral, causing the phase voltages to become unbalanced depending on the magnitude of the loads connected to each phase.
VnтАЛ=тИСYiтАЛтИСViтАЛYiтАЛтАЛ тАФ Millman's Theorem to calculate neutral shift voltage
VphaseтАЛ=VlineтАЛ/3тАЛ тАФ Relation in balanced star connection
In a balanced system, the neutral current is zero. When the neutral point floats, the potential of the neutral VnтАЛ is determined by the load impedances ZRтАЛ,ZYтАЛ,ZBтАЛ using Millman's Theorem: VnтАЛ=1/ZRтАЛ+1/ZYтАЛ+1/ZBтАЛVRтАЛ/ZRтАЛ+VYтАЛ/ZYтАЛ+VBтАЛ/ZBтАЛтАЛ. If the loads are unequal, the potential of the star point shifts, causing some phases to experience over-voltage while others experience under-voltage, leading to unequal line-to-neutral voltages.
A floating neutral creates an unstable star-point potential.
Unbalanced loads cause severe voltage fluctuations in the absence of a solid neutral connection.
It poses a high risk of damage to single-phase equipment connected to the supply.
Always ensure a low-impedance path to ground for the neutral in star-connected systems.
Permanent damage to sensitive single-phase loads due to over-voltage
Risk of electric shock due to potential buildup on the neutral wire
Voltage unbalance leading to improper operation of three-phase motors
Floating neutral is mostly observed in ungrounded secondary sides of transformers or broken neutral conductor scenarios.
Option A is incorrect because high voltage only occurs on the lightly loaded phases, not necessarily all.
Option B is incorrect because heavily loaded phases experience under-voltage.
C is correct тАФ Floating neutral results in an unstable star point, leading to unbalanced phase-to-neutral voltages across the load.
In competitive exams, remember that a floating neutral is essentially an open-circuit fault in the neutral path, making the load voltage dependent on the impedance ratio of the connected phases.